Brands

Denso Paste S105™ is a soft petrolatum primer containing water displacing corrosion inhibiting and flow control additives. The primer can be applied by gloved hand or stiff bristle brush.

Archco 15™ is a single part, high build, high performance water based acrylic topcoat for Denso Tape Systems.

Protal 7200™ is a VOC free, 100% solids, 2 part epoxy coating specially formulated to compliment FBE coated pipe. It is a high build liquid coating that is brush or spray applied in one coat in the field or shop. It cures very fast to allow quick handling and backfill times.

Protal 7300™ is a VOC free, 100% solids epoxy coating specially formulated to coat dry, damp or wet surfaces. It is a high build liquid coating that can be applied by applicator pad or brush.

Protal ARO™ is a VOC free, 100% solids liquid epoxy coating formulated to be applied over FBE as an ARO coating (abrasion resistant overlay). It is a 3:1 ratio coating that can be spray or hand applied in the shop or field.

Denso Paste™ is a soft brown petrolatum primer containing moisture displacing corrosion inhibiting compounds for application by stiff brush or gloved hand at normal ambient temperature. It does not dry, harden or crack.

Protal 600 CTE™ is a two-part high build coal tar epoxy, that can applied as a single or two-coat system. It is a polyamide with excellent abrasion and chemical resistance.

Denso Paste HT™ is a soft brown petrolatum paste containing moisture displacing corrosion inhibiting compounds for application by stiff brush or gloved hand. It does not dry, harden or crack.

Protal 7900HT™ is a VOC free, 100% solids epoxy coating for pipelines operating at higher temperatures. It is a high build liquid coating that can be hand or spray applied in one coat in the field or shop. It cures fast to allow quick backfill when applied to hot pipe.

Protal 600 CTE Low VOC™ is a two-part high build coal tar epoxy that has low VOC's. It can be applied as a single or two-coat system. It is a polyamide with excellent abrasion and chemical resistance.

Archco 65™ is a two-part, high solids aliphatic polyurethane with excellent gloss retention. The coating is designed as a topcoat to provide long-term protection and esthetic enhancement of structures.

Protal 650 CTR™ (Coal Tar Replacement) is a two-part product formulated to replace coal tar epoxy. It is based on polyamide chemistry designed as an environmentally friendly alternative to hazardous coal tar epoxies for long-term corrosion protection of steel and concrete substrates against water and seawater corrosion.