Brands

Protal 650 CTR™ (Coal Tar Replacement) is a two-part product formulated to replace coal tar epoxy. It is based on polyamide chemistry designed as an environmentally friendly alternative to hazardous coal tar epoxies for long-term corrosion protection of steel and concrete substrates against water and seawater corrosion.

Protal ARO™ is a VOC free, 100% solids liquid epoxy coating formulated to be applied over FBE as an ARO coating (abrasion resistant overlay). It is a 3:1 ratio coating that can be spray or hand applied in the shop or field.

Protal 600 CTE™ is a two-part high build coal tar epoxy, that can applied as a single or two-coat system. It is a polyamide with excellent abrasion and chemical resistance.

Protal 7200™ is a VOC free, 100% solids, 2 part epoxy coating specially formulated to compliment FBE coated pipe. It is a high build liquid coating that is brush or spray applied in one coat in the field or shop. It cures very fast to allow quick handling and backfill times.

Protal 7125™ is specifically formulated to be applied to colder substrates at colder ambient temperatures. It is a high build liquid coating that is brush or spray applied in one coat to many areas of in-service pipelines or during pipeline construction in the field. It cures fast to allow quick handling and backfilling, even down to -4°F (-20°C). Protal 7125™ is intended for use where a quick cure is required at lower substrate and/or ambient conditions such as during winter applications or on colder operating temperature pipelines.

Protal 600 CTE Low VOC™ is a two-part high build coal tar epoxy that has low VOC's. It can be applied as a single or two-coat system. It is a polyamide with excellent abrasion and chemical resistance.

Protal 7900HT™ is a VOC free, 100% solids epoxy coating for pipelines operating at higher temperatures. It is a high build liquid coating that can be hand or spray applied in one coat in the field or shop. It cures fast to allow quick backfill when applied to hot pipe.

Archco 65™ is a two-part, high solids aliphatic polyurethane with excellent gloss retention. The coating is designed as a topcoat to provide long-term protection and esthetic enhancement of structures.

Protal™ ST Epoxy Mastic is a two part, high solids, fast drying, glass flake epoxy coating for application directly onto wire brushed rusty steel substrates to SSPC-SP2/3. Its good penetration and adhesive properties ensure excellent protection in long term exterior exposure.

Archco 15™ is a single part, high build, high performance water based acrylic topcoat for Denso Tape Systems.