company tower banner
Detco Marine Company Logo

Detco Marine FG Silicone Spray

Detco Marine FG Silicone Spray is designed to lubricate equipment used in the packaging and processing industry. FG Silicone Spray leaves a non-staining dry pure silicone film to lubricate moving parts, reducing friction and wear. FG Silicone Spray is heat stable from -35°F to 350°F. FG Silicone Spray is also formulated as a release agent on seals and gaskets of tank closures.

Product Type: Industrial Lubricants

Features: Food Contact Acceptable, Odorless, Stain Resistant

Chemical Family: Silicones

  • TypeDocument Name
View All Documents

Knowde Enhanced TDS

Identification & Functionality

Base Oil Type
Chemical Family

Features & Benefits

Features
  • Lubricates all sliding surfaces except those you wish to paint.
  • Excellent on RV slide-outs.
  • Temperature Range -35°F to 350°F.
  • Rated for Incidental Food Contact.
  • Non-Staining.
  • Contains no methylene chloride.
  • Won’t melt, freeze, gum or become rancid.

Applications & Uses

Application Method
Uses
  • Use on sticking metal, wood, rubber and plastic.
  • Apply to cutting tables, conveyors, heat sealing equipment and slicing equipment.
  • Waterproofs leather, canvas, rubber and chrome surfaces.
  • Safe on all plastics.
Directions For Uses
  • Read cautions and directions carefully before use.
  • Area to be lubricated should be clean and dry.
  • Shake well before use. Hold can 6 - 8 inches from the surface.
  • Spray in short bursts.
  • Spray no more than required to lubricate the surface.
  • Do not spray electrical equipment while in use.
  • Wait 5 - 10 minutes before operating electrical equipment after using.
  • The spray is dry.
  • Do not expect a liquid.
  • Used as directed, it will not harm most surfaces.

Properties

Physical Form

Regulatory & Compliance

Regulations

Complies with FDA regulations, CFR Title 21, paragraph 178.3570 when fully cured.

Safety & Health

Danger
  • Extremely Flammable Aerosol.
  • Contains gas under pressure; may explode if heated.
  • Causes skin and eye irritation.
  • Suspected of causing cancer.
  • May cause drowsiness or dizziness.
  • May be fatal if swallowed and enters the airways.
  • Keep away from heat, sparks, open flames, and hot surfaces.
  • No smoking.
  • Do not spray on an open flame or other ignition sources.

Pressurized Container:

  • Do not pierce or burn, even after use.
  • Protect from sunlight.
  • Do not expose to temperatures exceeding 50°C/122°F.
  • Store in a well-ventilated place.
  • Wash hands thoroughly after handling.
  • Wear protective gloves.
  • Avoid breathing fumes, vapors, and spray.

If On Skin:

  • Wash with plenty of water.

If Skin Irritation Occurs:

  • Get medical attention.
  • Take off contaminated clothing and wash it before reuse.

If in Eyes:

  • Rinse cautiously with water for several minutes.
  • Remove contact lenses, if present and easy to do.
  • Continue rinsing.

If Eye Irritation Persists:

  • Get medical attention.

If Swallowed:

  • Immediately call a poison center or doctor.
  • Do not induce vomiting.

If Inhaled:

  • Remove person to fresh air and keep comfortable for breathing.
  • Call a poison center or doctor if you feel unwell.
  • Obtain special instructions before use.
  • Do not handle until all safety precautions have been read and understood.

If Exposed or Concerned:

  • Get medical advice or attention.
  • Use only outdoors or in a well-ventilated area.
  • Store locked up.
  • Dispose of contents and containers in accordance with local, state, and national regulations.
HMIS Ratings
Health 1
Flammability 3
Reactivity 0
Personal Protection B
  • 0 = Minimal
  • 1 = Slight
  • 2 = Moderate
  • 3 = Serious
  • 4 = Severe

Packaging & Availability

Packing
  • Doz Aerosol