Knowde Enhanced TDS
Identification & Functionality
- CASE Ingredients Functions
- Technologies
- Product Families
- Chemical Description
Dispersion of an oil-based elastomer-copolymer in reactive thinne
Applications & Uses
- Markets
- Use Level
- 10-30%
- Applications
All radically curing coatings, especially 100 % UV-systems. Deuteron SO 100 is intended for coatings which have to offer a special feel and matting up to a “soft touch”. It can be used in systems of all ranges of film thickness and is largely independent of the layer thickness. Deuteron SO 100 can be combined with other organic matting agents, waxes and silicas
- Dosage
The optimum dosage is highly dependent on the binders and reactive thinners used in the formulation as well as the desired surface characteristics and has to be determined by own trials. For initial experiments a dosage of approx. 10 - 30 % is recommended. The higher the active content of the additive in the final system, the stronger are the effects that can be achieved. Deuteron SO 100 is very compatible with coatings, therefore it is possible to use large dosages in order to achieve extreme effects.
- Processing
Deuteron SO 100 should be incorporated homogenously into the lacquer by stirrer or dissolver. It does not act as a foam-stabilizer.
Properties
- Physical Form
- Typical Properties
- Particle Size Distribution
| Value | Units | Test Method / Conditions | |
| Density | approx. 1.04 | g/cm3 | — |
| Active Agent Content | approx. 30 | % | — |
| Reactive Thinner | DPGDA | — | — |
| Viscosity | approx. 1200 | mPa.s | — |
| OH-Content (based on solid Content) | approx. 2.1 | % | — |
| Acid Value (based on solid Content) | approx. 15 | mg KOH/g | — |
| Type / Chem. base | Elastomer | — | — |
| Active Content | 30 | % | — |
| Value | Units | Test Method / Conditions | |
| Particle Size d50 | approx. 7 | µm | — |
| Particle Size d90 | approx. 15 | µm | — |
| d50 | 7.0 | µm | — |
| d90 | 15.0 | µm | — |
Safety & Health
- Safety Regulations
According to Regulation (EC) No. 1272/2008 Deuteron SO 100 is classified as a dangerous product and therefore needs to be labeled.
Storage & Handling
- Shelf Life
- 6 Months
- Storage Conditions & Package Sizes
Deuteron SO 100 can be stored in tightly sealed containers for at least 6 months at room temperature. The product must be stored under frost-free conditions. A storage temperature of 35 °C should not be exceeded. Phase separation may occur. It is therefore recommended to stir the product before removing material.
- Sheet steel hobbock (25 kg net)
- Steel drum (200 kg net)