Knowde Enhanced TDS
Identification & Functionality
- CASE Ingredients Functions
- Technologies
- Product Families
- Chemical Description
Dispersion of special waxes with inorganic and organic matting agents
Features & Benefits
- Labeling Claims
Applications & Uses
- Markets
- Cure Method
- Coating Type
- Use Level
- 10%
- Applications
Radically curing 100 % UV-systems (solvent-free).
- Dosage
The optimal dosage is dependent on the binders, photo initiators and reactive thinners used in the formulation. In some cases other additives influence the required dosage as well, which must therefore be determined by own trials using the total formulation. For initial experiments a dosage of approx. 10 % is recommended.
- Processing
Deuteron UV RM17 should be incorporated into the coating system at the end using a stirrer. It can be added either pre-thinned or pure. In systems containing pigments it should be examined whether an addition before or after grinding leads to better results.
Properties
- Physical Form
- Typical Properties
- Particle Size Distribution
Value | Units | Test Method / Conditions | |
Viscosity | approx. 15.000 | mPa.s | — |
Density at 20°C | approx. 1.08 | g/cm3 | — |
Active Agent Content | approx. 35.0 | % | — |
Type / Chem. base | Wax-Compound | — | — |
Active Content | 35 | % | — |
Value | Units | Test Method / Conditions | |
Particle size d50 | max. 3 | µm | — |
Particle size d90 | max. 8 | µm | — |
d50 | 2.5 | µm | — |
d90 | 9.5 | µm | — |
Safety & Health
- Safety Regulations
According to Regulation (EC) No. 1272/2008 Deuteron UV RM17 is classified as a dangerous product and therefore needs to be labeled
Storage & Handling
- Shelf Life
- 6 Months
- Storage Conditions & Package Sizes
Deuteron UV RM17 can be stored in tightly sealed containers for at least 6 months. The product must be stored under frost-free conditions. A storage temperature of 35 °C should not be exceeded otherwise the reactive thinner could be damaged. It is recommended to stir the product before removing material, because under unfavorable conditions phase separation can occur.
- Sheet steel hobbock (25 kg net)
- Steel drum (210 kg net)