Products

Deuteron MK-matting agents are suitable as exclusive matting agents for water-borne, solvent-borne and solvent-free systems, air-drying as well as stoving. They can also be used in printing inks, wood lacquers, UV-curing coatings, coil-coatings, lacquers on foils, aqueous wood- and furniture varnishes.The finer types are suitable where particularly thin dry films are applied or where very smooth surfaces have to be realized. The combination with inorganic matting agents is possible and leads to improved mechanical resistances. Scratch resistance and resistance against polishing will be increased.Deuteron MK matting agents are micro-ground resp. micronized powders. The fineness enables Deuteron MK-products to be used in a wide field of applications for producing satin-flat and satin-gloss coatings. The small binder demand of Deuteron MK only leads to a nonessential viscosity influence, which is important for UV-curing lacquers. Deuteron MK is resistant against solvents and chemicals which are customary in the paint industry. These products can also be used in exterior applications. Adjustments to specific requirements can easily be made due to the different particle sizes, available. back

Deuteron MK-matting agents are suitable as exclusive matting agents for water-borne, solvent-borne and solvent-free systems, air-drying as well as stoving. They can also be used in printing inks, wood lacquers, UV-curing coatings, coil-coatings, lacquers on foils, aqueous wood- and furniture varnishes.The finer types are suitable where particularly thin dry films are applied or where very smooth surfaces have to be realized. The combination with inorganic matting agents is possible and leads to improved mechanical resistances. Scratch resistance and resistance against polishing will be increased.Deuteron MK matting agents are micro-ground resp. micronized powders. The fineness enables Deuteron MK-products to be used in a wide field of applications for producing satin-flat and satin-gloss coatings. The small binder demand of Deuteron MK only leads to a nonessential viscosity influence, which is important for UV-curing lacquers. Deuteron MK is resistant against solvents and chemicals which are customary in the paint industry. These products can also be used in exterior applications. Adjustments to specific requirements can easily be made due to the different particle sizes, available. back

Deuteron OG 8674 is based on polymethyl urea resin as an effective substance. The resin shows excellent hardness and abrasion resistance. It is resistant to most customary solvents and shows a good resistance to temperatures of up to 200 °C. When used as an additive in solvent-based paint systems, Deuteron OG 8674 improves properties regarding slip and static friction and provides increased mechanical resistance. Compared with wax-based additives Deuteron OG 8674 does not spoil the recoatability. The small particle size also allows for its use in coating systems which are applied in low film thickness. Deuteron OG 867x can reduce the gloss when used as a surface additive. This can be desired for certain applications. The gloss reduction is dependant on the type of employed binder, the applied film thickness and the selected dosage.Deuteron OG 8674 is designed for use in aqueous lacquers and in coatings which are applied in low film thickness. Due to the good weather resistance and color fastness of the used polymer the product can also be used in coating systems for exterior applications. This additive is the alternative to wax-dispersions with their well-known typical side-effects. back

Deuteron OG 8634 is based on polymethyl urea resin as an effective substance. The resin shows excellent hardness and abrasion resistance. It is resistant to most customary solvents and shows a good resistance to temperatures of up to 200 °C. When used as an additive in solvent-based paint systems, Deuteron OG 8634 improves properties regarding slip and static friction and provides increased mechanical resistance. Compared with wax based, Deuteron OG 8634 does not spoil the recoatability. The small particle size allows for its use in coating-systems which are applied in low film thickness. Deuteron OG 863x can reduce the gloss when used as a surface additive. This can be desired for certain applications. The gloss reduction is dependant on the type of employed binder, the applied film thickness and the selected dosage.Deuteron OG 8634 is designed for the use in aqueous and solvent-based lacquers and in coatings which are applied in low film thickness. Due to the good weather resistance and color fastness of the used polymer the product can also be used in coating systems for exterior applications. This additive is the alternative to wax dispersions with their well-known typical side-effects. back

Pergopak-matting agents are suitable as exclusive matting agents for water-borne, solvent-borne and solvent-free systems, air-drying as well as stoving. They can also be used in printing inks, wood lacquers, UV-curing coatings, coil-coatings, lacquers on foils, aqueous wood- and furniture varnishes.The finer types are suitable where particularly thin dry films are applied or where very smooth surfaces have to be realized. The combination with inorganic matting agents is possible and leads to improved mechanical resistances. Scratch resistance and resistance against polishing will be increased.Deuteron MK matting agents are micro-ground resp. micronized powders. The fineness enables Pergopak M-products to be used in a wide field of applications for producing satin-flat and satin-gloss coatings. The small binder demand of Pergopak M only leads to a nonessential viscosity influence, which is important for UV-curing lacquers. Deuteron MK is resistant against solvents and chemicals which are customary in the paint industry. These products can also be used in exterior applications. Adjustments to specific requirements can easily be made due to the different particle sizes, available. back

Deuteron OG 8614 is based on polymethyl urea resin as an effective substance. The resin shows excellent hardness and abrasion resistance. It is resistant to most customary solvents and shows a good resistance to temperatures of up to 200 °C. When used as an additive in solvent based paint systems, Deuteron OG 8614 improves properties regarding slip and static friction and provides increased mechanical resistance. Compared with wax-based additives, Deuteron OG 8614 does not spoil the recoatability. The small particle size allows for its use in coating-systems which are applied in low film thickness. Deuteron OG 861x can reduce the gloss when used as a surface additive. This can be desired for certain applications. The gloss reduction is dependant on the type of employed binder, the applied film thickness and the selected dosage.Deuteron OG 8614 is recommended for use in solvent based coatings which are applied in low film thickness, e.g. can-coatings. Due to the good weather resistance and color fastness of the used polymer the product can also be used in coating systems for exterior applications. This additive is the alternative to wax dispersions with their well-known typical side-effects. back

Deuteron MK-matting agents are suitable as exclusive matting agents for water-borne, solvent-borne and solvent-free systems, air-drying as well as stoving. They can also be used in printing inks, wood lacquers, UV-curing coatings, coil-coatings, lacquers on foils, aqueous wood- and furniture varnishes.The finer types are suitable where particularly thin dry films are applied or where very smooth surfaces have to be realized. The combination with inorganic matting agents is possible and leads to improved mechanical resistances. Scratch resistance and resistance against polishing will be increased.Deuteron MK matting agents are micro-ground resp. micronized powders. The fineness enables Deuteron MK-products to be used in a wide field of applications for producing satin-flat and satin-gloss coatings. The small binder demand of Deuteron MK only leads to a nonessential viscosity influence, which is important for UV-curing lacquers. Deuteron MK is resistant against solvents and chemicals which are customary in the paint industry. These products can also be used in exterior applications. Adjustments to specific requirements can easily be made due to the different particle sizes, available. back

Deuteron OG 8672 is based on polymethyl urea resin as an effective substance. The resin shows excellent hardness and abrasion resistance. It is resistant to most customary solvents and shows a good resistance to temperatures of up to 200 °C. When used as an additive in solvent-based paint systems, Deuteron OG 8672 improves properties regarding slip and static friction and provides increased mechanical resistance. Compared with wax-based additives Deuteron OG 8672 does not spoil the recoatability. The small particle size also allows for its use in coating systems which are applied in low film thickness. Deuteron OG 867x can reduce the gloss when used as a surface additive. This can be desired for certain applications. The gloss reduction is dependant on the type of employed binder, the applied film thickness and the selected dosage.Deuteron OG 8672 is designed for use in aqueous lacquers and in coatings which are applied in low film thickness. Due to the good weather resistance and color fastness of the used polymer the product can also be used in coating systems for exterior applications. This additive is the alternative to wax-dispersions with their well-known typical side-effects. back

Deuteron OG 8612 is based on polymethyl urea resin as an effective substance. The resin shows excellent hardness and abrasion resistance. It is resistant to most customary solvents and shows a good resistance to temperatures of up to 200 °C. When used as an additive in solvent based paint systems, Deuteron OG 8612 improves properties regarding slip and static friction and provides increased mechanical resistance. Compared with wax-based additives, Deuteron OG 8612 does not spoil the recoatability. The small particle size allows for its use in coating-systems which are applied in low film thickness. Deuteron OG 861x can reduce the gloss when used as a surface additive. This can be desired for certain applications. The gloss reduction is dependant on the type of employed binder, the applied film thickness and the selected dosage.Deuteron OG 8612 is recommended for use in solvent based coatings which are applied in low film thickness, e.g. can-coatings. Due to the good weather resistance and color fastness of the used polymer the product can also be used in coating systems for exterior applications. This additive is the alternative to wax dispersions with their well-known typical side-effects. back

Deuteron OG 863 is based on polymethyl urea resin as an effective substance. The resin shows excellent hardness and abrasion resistance. It is resistant to most customary solvents and shows a good resistance to temperatures of up to 200 °C. When used as an additive in solvent-based paint systems, Deuteron OG 863 improves properties regarding slip and static friction and provides increased mechanical resistance. Compared with wax based, Deuteron OG 863 does not spoil the recoatability. The small particle size allows for its use in coating-systems which are applied in low film thickness. Deuteron OG 863x can reduce the gloss when used as a surface additive. This can be desired for certain applications. The gloss reduction is dependant on the type of employed binder, the applied film thickness and the selected dosage.Deuteron OG 863 is designed for the use in aqueous and solvent-based lacquers and in coatings which are applied in low film thickness. Due to the good weather resistance and color fastness of the used polymer the product can also be used in coating systems for exterior applications. This additive is the alternative to wax dispersions with their well-known typical side-effects. back

Deuteron OG 861 is based on polymethyl urea resin as an effective substance. The resin shows excellent hardness and abrasion resistance. It is resistant to most customary solvents and shows a good resistance to temperatures of up to 200 °C. When used as an additive in solvent based paint systems, Deuteron OG 861 improves properties regarding slip and static friction and provides increased mechanical resistance. Compared with wax-based additives, Deuteron OG 861 does not spoil the recoatability. The small particle size allows for its use in coating-systems which are applied in low film thickness. Deuteron OG 861x can reduce the gloss when used as a surface additive. This can be desired for certain applications. The gloss reduction is dependant on the type of employed binder, the applied film thickness and the selected dosage.Deuteron OG 861 is recommended for use in solvent based coatings which are applied in low film thickness, e.g. can-coatings. Due to the good weather resistance and color fastness of the used polymer the product can also be used in coating systems for exterior applications. This additive is the alternative to wax dispersions with their well-known typical side-effects. back

Because of its cationic character and the extreme polarity of Deuteron LE 80, the electric resistance of organic solvents and their mixtures is considerably reduced – even when using small quantities.Deuteron LE 80 is soluble in all common lacquer solvent mixtures, sometimes being slightly cloudy.Deuteron LE 80 can be used in air-drying primers and coatings, baking enamels, 2-compound systems and wood finishes. back

Pergopak-matting agents are suitable as exclusive matting agents for water-borne, solvent-borne and solvent-free systems, air-drying as well as stoving. They can also be used in printing inks, wood lacquers, UV-curing coatings, coil-coatings, lacquers on foils, aqueous wood- and furniture varnishes.The finer types are suitable where particularly thin dry films are applied or where very smooth surfaces have to be realized. The combination with inorganic matting agents is possible and leads to improved mechanical resistances. Scratch resistance and resistance against polishing will be increased.Deuteron MK matting agents are micro-ground resp. micronized powders. The fineness enables Pergopak M-products to be used in a wide field of applications for producing satin-flat and satin-gloss coatings. The small binder demand of Pergopak M only leads to a nonessential viscosity influence, which is important for UV-curing lacquers. Deuteron MK is resistant against solvents and chemicals which are customary in the paint industry. These products can also be used in exterior applications. Adjustments to specific requirements can easily be made due to the different particle sizes, available. back

Deuteron OG 8632 is based on polymethyl urea resin as an effective substance. The resin shows excellent hardness and abrasion resistance. It is resistant to most customary solvents and shows a good resistance to temperatures of up to 200 °C. When used as an additive in solvent-based paint systems, Deuteron OG 8632 improves properties regarding slip and static friction and provides increased mechanical resistance. Compared with wax based, Deuteron OG 8632 does not spoil the recoatability. The small particle size allows for its use in coating-systems which are applied in low film thickness. Deuteron OG 863x can reduce the gloss when used as a surface additive. This can be desired for certain applications. The gloss reduction is dependant on the type of employed binder, the applied film thickness and the selected dosage.Deuteron OG 8632 is designed for the use in aqueous and solvent-based lacquers and in coatings which are applied in low film thickness. Due to the good weather resistance and color fastness of the used polymer the product can also be used in coating systems for exterior applications. This additive is the alternative to wax dispersions with their well-known typical side-effects. back

Deuteron OG 8670 is based on polymethyl urea resin as an effective substance. The resin shows excellent hardness and abrasion resistance. It is resistant to most customary solvents and shows a good resistance to temperatures of up to 200 °C. When used as an additive in solvent-based paint systems, Deuteron OG 8670 improves properties regarding slip and static friction and provides increased mechanical resistance. Compared with wax-based additives Deuteron OG 8670 does not spoil the recoatability. The small particle size also allows for its use in coating systems which are applied in low film thickness. Deuteron OG 867x can reduce the gloss when used as a surface additive. This can be desired for certain applications. The gloss reduction is dependant on the type of employed binder, the applied film thickness and the selected dosage.Deuteron OG 8670 is designed for use in aqueous lacquers and in coatings which are applied in low film thickness. Due to the good weather resistance and color fastness of the used polymer the product can also be used in coating systems for exterior applications. This additive is the alternative to wax-dispersions with their well-known typical side-effects. back