Knowde Enhanced TDS
Identification & Functionality
- Fillers Included
- Polymer Name
- Plastics & Elastomers Functions
- Technologies
Applications & Uses
- Applications
- Plastics & Elastomers End Uses
- Plastics & Elastomers Processing Methods
Properties
- Flame Rating
- Mechanical Properties
- Typical Properties
- Flammability
| Value | Units | Test Method / Conditions | |
| Abrasion Resistance (CS-17,1000gms,1000 cycles) | 0.026 | gms | ASTM D 1044 |
| Flexural Modulus | 81000 | kg/cm2 | ASTM D-790 |
| Flexural Strength | 1343 | kg/cm2 | ASTM D-790 |
| Hardness | 83 | Shore D | ASTM D 2240 |
| Izod Impact Strength (Notched) at 23 °C | 11 | kg . cm/cm | ASTM D-256 |
| Tensile Strength at Yield | 1100 | kg/cm2 | ASTM D-638 |
| Value | Units | Test Method / Conditions | |
| Water Absorption (24 hrs immersion at 23 +/- 1 °C) | 0.05 | % | ASTM D 570 |
| Density | 1.26 | g/cc | ASTM D792 |
| Heat Deflection Temperature at 18.5 Kg/cm2 | 132 | °C | ASTM D-648 |
| Melt Flow Index at 280 °C /3.8 Kg | 1.44 | g/10 min | ASTM D 1238 |
| Shrinkage (In Flow Direction at3.2 mm Thickness) | 0.25 | % | ASTM D 955 |
| Value | Units | Test Method / Conditions | |
| Flammability Rating At 3.2 mm Thickness | HB | mm/mm | UL 94 |
Regulatory & Compliance
- Certifications & Compliance
Technical Details & Test Data
- Processing Parameters
Pre Drying - With a dehumidified air drying equipment at 80~100°C for 2-3 Hours.
Recommended Molding Conditions :
- Barrel temperatures :
- Feed zone : 250-255°C
- Compression zone : 255-260°C
- Front zone : 260-265°C
- Nozzle : 265-270°C
- Mold temperatures : 80-100°C
- Barrel temperatures :
Safety & Health
- Product Safety
Please refer to the Material Safety Data Sheet for Dpnor Compounds.