Knowde Enhanced TDS
Identification & Functionality
- Agrochemical Functions
- Technologies
- Product Families
Applications & Uses
- Markets
- Applications
- Applicable Crop
- Application Technique
- Fungicide Target Species
- Plants and Diseases for Using the Plant Protection Product
Plant Name Disease Name Usage Dose Potatoes Potato root neck necrosis and Black wart disease
(Rhizoctonia solani)20 ml/100 kg seeds - Preparing the Plant Protection Product for Application
- Provided that it is well calibrated, Arrow Max 100 FS can be used without diluting or diluting, with tools called 'Flow Seed Treater', which spray the plant protection product from the nozzles while the seeds pass through the walking belt, or with the spinning disk seed spraying tools with a fogging chamber.
- If there is no suitable equipment, the seeds are spread on a flat surface and the application is made to provide a homogeneous coating.
- During the application, the seed should be mixed well and the tubers should be well wetted.
- If it is desired to be used diluted, the drug premix should be prepared as follows:
- Fill the mixing container of the plant protection product with the amount of water given in the example below.
- Shake the medicine well before use.
- Add required amount of Arrow Max 100 FS to the water while stirring continuously.
- This plant protection product premix should be mixed continuously until the end of use.
- This mixture should be used within 24 hours at the latest after preparation.
- The application should be made to the seeds before planting.
- It should be done by dipping, fogging and spraying.
- Premix is obtained by mixing the plant protection product recommended for spraying 100 kg of potato seeds with 1000 ml of water as above.
- This premix obtained is applied uniformly to 100 kg of seeds with the specified tools.
- It is applied by using a back sprayer on the seeds laid on a clean surface under the conditions of the producer.
- During the application, the seeds should be mixed well and the tubers should be well wetted.
- Resistance Management
- The crop protection product named Arrow Max is a Fungicide classified as group E2,12 according to its mechanism of action.
- Repeated applications of plant protection products with the same mechanism of action encourage the development of resistance.
- Therefore, in order to delay the development of resistance, do not exceed the total number of applications of Arrow Max recommended in the same production season.
- In cases where the application needs to be repeated, pay attention to the use of plant protection products with different mechanisms of action (except for group E2,12).
- Compatibility
It is recommended to perform a premix test before mixing other seed pesticides with a neutral reaction with WS or FS formulations.
Packaging & Availability
- Packaging Type
- Packaging
In 100 ml, 250 ml, 500 ml and 1 Lt packages.