Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Chemical Name
- INCI Name
- Ingredient Origin
- CASE Ingredients Functions
- Cosmetic Ingredients Functions
- Fluids & Lubricants Functions
- Technologies
Features & Benefits
- Benefit Claims
- Labeling Claims
- CASE Ingredients Features
- Fluids & Lubricants Features
- Industrial Additives Features
Applications & Uses
- Applications
- AP/Deo Applications
- Bath & Shower Applications
- Hair Care Applications
- Industrial Additives End Use
- Nail Care Applications
- Skin Care Applications
- Sun Care Applications
- Usage Method
XIAMETER PMX-200 Silicone Fluid may be used alone or blended with other cosmetic fluids to provide a fluid base for a variety of cosmetic ingredients. It feature good solubility in most anhydrous alcohols and in many solvents used in cosmetics.
Properties
- Appearance
- Crystal clear liquid, free of suspended matter or sediment
- Typical Properties
- Solubility
- Notes
- The melt point temperature is a typical value and may vary somewhat due to molecular distribution. If the melting point is critical to your application, then several lots should be thoroughly evaluated.
- Due to different rates of cooling, this test method may yield pour points lower than the temperature at which these fluids would melt.
- Fedors Method: R.F. Fedors, Polymer Engineering and Science, Feb. 1974.
Value | Units | Test Method / Conditions | |
Specific Gravity (at 25°C) | 0.949 | — | — |
Refractive Index (at 25°C) | 1.4009 | — | — |
Color | 5.0 | APHA | — |
Flash Point | 246.0 | °C | Closed Cup |
Acid Number | Trace | — | BCP |
Melt Point | -52.0 | °C (1,2) | — |
Pour Point | -84.0 | °C | — |
Surface Tension (at 25°C) | 20.6 | dynes/cm | — |
Volatile Content (at 150°C) | 4.5 | % | — |
Viscosity Temperature Coefficient | 0.59 | — | — |
Coefficient of Expansion | 0.00107 | cc/cc/°C | — |
Thermal Conductivity (at 50°C) | 0.00034 | g cal/cm·sec·°C | — |
Solubility Parameter | 7.3 | — | — |
Viscosity (Capillary, 25°C) | 18 - 22 | mm2/s | CTM0004 |
Volatile Content (2g, 200°C, 20m, Al Cup) | 0 - 10.0 | % | CTM0208 |
Value | Units | Test Method / Conditions | |
Chlorinated Solvents | High | — | — |
Aromatic Solvents | High | — | — |
Aliphatic Solvents | High | — | — |
Dry Alcohols | Good | — | — |
Water | Poor | — | — |
Regulatory & Compliance
- Certifications & Compliance
Storage & Handling
- Shelf Life
- 1080 days
- Storage Conditions
When stored at or below 25°C (77°F) in the original unopened containers, this product has a usable life ranging from 30 to 60 months from the date of production depending on viscosity.
- Handling Precautions
XIAMETER PMX-200 Silicone Fluid may cause temporary eye discomfort. Use caution when handling volatile fluids at temperatures with 10°C of the quoted flash point. At elevated temperatures, XIAMETER PMX-200 Silicone Fluids are sensitive to contamination by strong acids, bases, some metallic compounds and oxidizing agents. These contaminants may cause an accelerated rate of volatile byproduct formation. Oxidizing agents can also cause an increase in fluid viscosity. When these conditions may exist, it is recommended that the flash point of the fluids be checked periodically to monitor operational safety. Also, ignitable conditions may exist if the fluid is giving off smoke