Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Product Type
- Technologies
- Product Families
Features & Benefits
- Ready-to-Use Product Features
Applications & Uses
- Markets
- Applications & Uses
INTENDED USES
Recommended for service on steel structures up to 500 F.SURFACE PREPARATION
Surfaces that are to be coated must be clean, dry and free of surface contaminants. For best performance, blast clean to an SSPC-SP10 Near White Metal Blast Cleaning.
MIXING
Single component product, stir thoroughly before applying
APPLICATION- Airless recommended tip sizes (.012-.015)
- Air Assisted Airless - Kremlin Model 17:35 or larger, MX Gun
- Conventional- Binks Model 2001 or equivalent HVLP- Binks Model Mach 1
- Brush/Roll-Small areas only
PRIMERS
Self-priming or compatible heat resistant primer.
CLEANING UP
Aromatic solvents (xylene, tolene, solvent 25)
Properties
- Color
- Typical Properties
| Value | Units | Test Method / Conditions | |
| Vehicle Type | Silicone Epoxy Resin | - | - |
| Finish | Gloss | - | - |
| Solids By Volume (Average) | 40.0 | % | - |
| Solids By Weight (Average) | 39.0 | % | - |
| Viscosity | 62 - 73 | Krebs | - |
| V.o.C. | 4.94 | Ibs. per gal | - |
| Heat Resistance | 500.0 | °F | - |
| Recommended Dry Film Thickness | 1.5 - 2.0 | mils | - |
| Theoretical Coverage | 304 - 406 | sq.ft. per gal. | - |
| Dry Time (77°F, Tack Free) | 45.0 | minutes | - |
| Dry Time (77°F, Handle) | 2.0 | hours | - |
| Dry Time (77°F, Recoat) | 4 - 24 | hours | - |
Regulatory & Compliance
- Compliance
Compliance: Federal Regulations
RULE CATEGORY MAXIMUM LEVELS COMPLIANT NESHAP High Temperature 500 g/l No Automobile Refinishing N/A N/A AIM High Temperature 650 g/l Yes
Safety & Health
- Safety
Products are intended for industrial use only; improper handling and misuse may be hazardous.
Packaging & Availability
- Ordering
These products are available in 1 and 5 gallons pails, 55-gallon drums and spray cans.