Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Product Type
- Technologies
- Product Families
Features & Benefits
- Labeling Claims
Applications & Uses
- Application Method
- Application
Application Method
FOR SEALED (NON-ABSORPTIVE) SUBSTRATES: DUR-A-TEX LMS PRIMER must be stirred before using. Apply one coat of DUR-A-TEX LMS PRIMER full strength using a broom or 3/8” nap roller. Pour out and work into surface, leave no puddles or bare spots. Application should be approximately 500 square feet per gallon. Apply FLEXLINE LM PLUS MORTAR once the primer has dried for a minimum of 1 hour and up to 24 hours. If primer has dried longer than 24 hours a second coat of primer may be required. Keep all materials cool prior to mixing.
Limitations
This product is best suited for application in temperatures between 55°F and 90°F.
Surface Preparation
This product requires preparation in order to perform as expected. Substrate must be profiled, clean, sound, and dry. Please refer to the master Surface Preparation Guide on our website for more information.
Caution
Follow The Hazardous Materials Identification System Labeling Guide For Proper Personal Protective Equipment To Use When Handling This Product. Use Only As Directed. Keep Out Of Reach Of Children.
Packaging & Availability
- Packaging
DUR-A-TEX LMS PRIMER is available in 1 gallon jugs.
Storage & Handling
- Storage
- Keep liquid from freezing at all times.
- Shake container before using.