Products

DriCAT® 2710 is primary cobalt based solventborne driers in bio-based solvents. It has 10% Cobalt Carboxylate.

Duroct® Calcium 4% is standard drier available in various percentages.

Duroct® Iron 9% has improved combustion, often used with calcium or manganese (Stationary Boilers). It is standard drier available in various percentages.

DriCAT® 2508 is a primary manganese based solventborne driers in bio-based solvents. It has 8% Manganese Carboxylate.

DriCAT® 2005 is a low VOC Driers for Solventborne coatings. It is 5% Calcium 2-Ethylhexanoate in Methyl Soyate.

Duroct® Calcium WR 6% is a drier used for waterborne coatings. It is a standard drier available in various percentages.

DriCAT® 2735F is used for solventborne systems. It gives superior long term color retention.

DriCAT® 4012 is 12% Zirconium 2-Ethylhexanoate in Methyl Soyate. It is used as an addtive, in soya Methyl Ester as solvent, used to promote improved adhesion of solventborne inks.

Duroct® Barium 12.5% is used as synergist for use with Iron Fuel Additives. It is standard driers available in various percentages.

Duroct® Cerium 12% has improved combustion, soot suppression and improved high temperature corrosion resistance (Aviation Fuels). It is a Drier for use in white and pastel inks to minimize discoloration. It is standard drier available in various percentages.

DriCAT® 2735AQ is developed as a VOC free, water soluble complex for waterborne coatings.

DriCAT® 408SME is a high activity cobalt free drier for waterborne inks.

DriCAT® 408 is a special cobalt-free drier catalyst for oxidatively drying urethane alkyd lacquers. Clear floor coatings based on urethane modified lacquers show mostly a dark color when cobalt is used as a drier. DriCAT 408 is a drier complex that can be combined with, for example, zirconium and calcium and will assure good drying properties of urethane alkyds while keeping the hue as light as possible.

DriCAT® 2756FW has superior long term drying performance retained on storage in waterborne systems.