Knowde Enhanced TDS
Identification & Functionality
- Product Type
- Technologies
- Product Families
Features & Benefits
- Ready-to-Use Product Features
Applications & Uses
- Markets
- Application Area
- Applications
- Bearings
- Wrist pins
- Reciprocating parts
- Firearms
- All parts requiring wear protection
- Applicable Substrates
- Carbon Steel
- Stainless Steel
- Aluminum
- Inconel
- Ti Alloys
- Ni/Ni Alloys
- SiC
Properties
- Typical Properties
| Value | Units | Test Method / Conditions | |
| Thickness | 1.0 - 6.0 | µm | — |
| Hardness (Adjustable to Application) | 15 - 20 | GPa | — |
| Hardness (Stainless 304, Typical) | max. 1 | GPa | — |
| Hardness (Stainless 17 - 4, Typical) | max. 5 | GPa | — |
| Hardness (Inconel 718, Typical) | max. 3 | GPa | — |
| Hardness (Chrome on Steel,Typical) | 3×10⁻⁴ | GPa | — |
| Wear Rate (Typical, Dry) | 1×10⁻⁷ | mm³/nm | — |
| Wear Rate (Stainless 304) | 1×10⁻³ | mm³/nm | — |
| Wear Rate (Stainless 17 - 4) | 4×10⁻³ | mm³/nm | — |
| Wear Rate (Inconel 718) | 6×10⁻⁴ | mm³/nm | — |
| Wear Rate (Chrome on Steel) | 3×10⁻⁴ | mm³/nm | — |
| Coefficient of Friction (Dry) | max. 0.1 | — | — |
| Deposition Method | PVD + PECVD | — | — |
| Deposition Temperature (Substrate Dependent) | 150 - 250 | ºC | — |
| Deposition System | Duralar Centurion | — | — |
| Deposition Rate (Typical) | min. 2 | µm/hr | — |