Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Technologies
- Product Families
Features & Benefits
- Labeling Claims
- Ready-to-Use Product Features
- Product Highlights
ELASTASEAL seals leaks immediately and permanently while preventing further corrosion. ELASTASEAL is a versatile, elastomeric, industrial maintenance coating and joint compound which offers good chemical resistance, UV stability, and has outstanding adhesion to a wide variety of surfaces. ELASTASEAL tolerates less than ideal surface conditions and can may be applied to both asphalt and concrete, secondary containment structures. ELASTASEAL can also be applied over geotextiles to form excellent barriers over sand, dirt or rock ELASTASEAL is 100% solids, free of VOCs.
- Product Features & Benefits
- Offers excellent protection with flexibility.
- Excellent UV stability excellent impact resistance and corrosion protection.
- Excellent flexibility.
- 300% elongation.
- Liner over earth and geotextile.
- UV stable - adjusts from freeze to thaw.
- Works on all metal, fiberglass, stainless steel, concrete and wood surfaces.
- 100% solids, free of solvents - No VOCs.
- Ideal for Cooling Tower Repair, Condenser Pans, Leak Repair, Tank Linings, Concrete Base Coats, Large Stress Cracks, Concrete and Metal Topcoat, Secondary Containment Structures and Expansion Joints
Applications & Uses
- Markets
- Applications
- Compatible Substrates & Surfaces
- Primer
- Self-priming
- Mix Ratio
1:1 (Resin:Hardener) by Volume.
- Mixing & Thinning
Mixing - Power mix part A resin separately, then add part B hardener combine and power mix.
Thinning - Contact Dynesic Technical Service if thinning is desired.
Ratio - 1:1 Ratio (A to B) by Volume
*Do not keep the blended coating in the original container unless immediate use is planned. Otherwise, exothermic heat created during the curing process will considerably shorten the pot life. Pour the coating into a rolling tray or directly on the surface. Try to keep the depth of the coating in the tray below 3/8".
- Substrates & Surface Preparation
General - Surfaces must be clean and dry. Remove all dirt, dust, oil and all other contaminant.
Steel Immersion - SSPC-SP10 near white with jagged profile of 2.5 - 3.5 mils.
Non-immersion - SSPC-SP6 1.5 - 3.0 mils SSPC-SP2 or SP3 are suitable cleaning methods for mild environments.
Concrete or CMU - Concrete must be cured 28 days at 75°F (24°C) and 50% relative humidity or equivalent. Prepare surfaces in accordance with ASTM D4258 Surface Cleaning of Concrete and ASTM D4259 Abrading Concrete. Voids in concrete may require surfacing. Mortar joints should be cured a min of 15 days. Prime with Dynesic DX-1100 Concrete Primer.
*For previously painted surfaces contact Dynesic Technical Service Department.
- Application Equipment Guidelines
Listed below are general equipment guidelines for the application of ELASTASEAL. Job site conditions may require modifications to these guidelines to achieve the desired results.
Spray Application (General) - This is a 100% solids coating and may require adjustments in spray techniques. Wet film thickness is easily and quickly achieved. The following spray equipment has been found suitable and is available from manufacturers such as Binks, DeVilbiss and Graco.
- Diameter of Whip: 1/4 - 3/8” ID
- Length of Whip: 20 feet
- Power Ratio Pump: 45:1 or greater
- Static Mixer: 2 x 1/2" ID x 12" in length behind mixing valve
- Part A Temperature: 130 - 135°F in reservoir tank
- Part B Temperature: 90 - 95°F in reservoir tank
Airless Spray Single Leg or Hot Pot
- Pump Size: 45:1 or greater
- Hose Length/Diameter: 50 ft x 3/8"
- Whip Length/Diameter: 10 ft x 1/4"
*Part A resin and Part B hardener should be heated individually to 75 - 85°F before mixing so ELASTASEAL will atomize properly in delivering paint to the substrate. Mixed product
should be sprayed within 20 minutes after mixing.Brush/Roller - Can be brush or roller applied. Be aware of working life when using brush or roller application.
- Cleanup
Use MEK. In case of spillage, absorb and dispose of in accordance with local, applicable regulations.
Properties
- Finish
- Gloss
- Typical Properties
- Chemical Resistance
- Acetic Acid up to 8%
- Ammonium Hydroxide up to 25%
- Brine
- Copper Sulfate
- Hydrochloric Acid up to 36%
- Hydrogen Sulfide
- Mineral Spirits
- Nitric Acid up to 10%
- Potassium Hydroxide up to 50%
- Sulfuric Acid up to 50%
- Sodium Hydroxide up to 50%
| Value | Units | Test Method / Conditions | |
| Coverage (Theoretical, 10 mils) | 160.0 | ft2/gal | — |
| Coverage (Theoretical, 20 mils) | 80.0 | ft2/gal | — |
| Dry Film Thickness (Horizontal Surfaces) | 15 - 20 | mils | — |
| Dry Film Thickness (Vertical Surfaces) | 6 - 10 | — | — |
| Elongation | 300.0 | % | — |
| Flash Point | min. 240 | °F | — |
| Full Cure (75°F) | 7.0 | days | — |
| Impact Strength (80°F) | 65.0 | ft. lbs. | — |
| Light Traffic (75°F) | 7.0 | days | — |
| Pot Life (40°F) | 3.0 | hours | — |
| Pot Life (75°F) | 2.0 | hours | — |
| Pot Life (92°F) | 1.5 | hours | — |
| Recoat Window (75°F) | 24.0 | hours | — |
| Solids Content (By Volume) | 100.0 | % | — |
| Specific Gravity (Hardener) | 0.97 | — | — |
| Specific Gravity (Resin) | 1.44 | — | — |
| Tack Free (75°F) | 48.0 | hours | — |
| Temperature Resistance (Dry Service) | max. 200 | °F | — |
| Temperature Resistance (Dry Service) | max. 150 | °F | — |
| Tensile Strength | 287.0 | psi | — |
| Theoretical Coverage (1 mil) | 1604.0 | ft2 | — |
| Theoretical Coverage (10 mil) | 160.0 | ft2 | — |
| Volatile Organic Compounds (VOC) | 0.0 | grams/liter | — |
| Weight Per Gallon | 10.0 | lbs. | — |
Safety & Health
- Safety
Read and follow all caution statements on this product data sheet and on the SDS for ELASTASEAL. Wear protective clothing, gloves and use protective cream on face, hands and all exposed areas.
Packaging & Availability
- Container Sizes
2 Gallon Kit
Storage & Handling
- Shelf Life
- Part A - 24 months at 75°F (24°C)
- Part B - 24 months at 75°F (24°C)
*When kept at recommended storage conditions and in original unopened containers.
- Storage
Store Indoors.
Storage Temperature - 40 - 110°F
Storage Humidity (Relative Humidity) - 0 - 100 %
- Shipping Weight (Approximate)
2 Gallon Kit - 20 lbs. (11 kg)