Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Product Type
- Technologies
- Product Families
Features & Benefits
- Ready-to-Use Product Features
Applications & Uses
- Application Method
- Compatible Substrates & Surfaces
- Applications & Uses
Dry Times
When multiple coats are applied, the dry time between coats depends upon film thickness, temperature and humidity. If the first coat is in the critical cure stage it may be lifted or blistered by the second coat. To test, apply a small swatch over first coat and observe for a few minutes. If no film distortion occurs, it is safe to recoat. When in doubt, allow one week before recoating.Application
- Preparation: - Apply to properly cleaned or treated surface. This may consist of solvent wiping, wire brushing, sandblasting, phosphate treatment or chemical etching. All surfaces must be free of dust, oils and other surface contaminates before application.
- Reduction: If reduction is necessary use water
- Method: Spray, Airless or Electrostatic if controlled. Application properties can be
- adjusted with special solvents.
- Recommended Dry Film 1 Mil
- Primer: None
- Temperature: Ambient temperature above 50 deg. F
Clean Up
Recommended for clean-up is Water.
Properties
- Color
- Physical Properties
| Value | Units | Test Method / Conditions | |
| Viscosity | 95 - 100 | K.U. | - |
| Gloss | Gloss | - | - |
| Flash Point | Non-Flammable | - | - |
| Solids by Volume | 28 - 32 | % | - |
| Dry Time to Touch (77 °F, 50% RH) | 30.0 | Minutes | - |
| Weight Per Gallon | 8.57 | - | - |
| Specific Gravity | 1.0755 | - | - |
| Theoretical Coverage (I mil dry, No loss assumed) | 481.0 | sq. ft. pergallon | - |
| Solids by Weight | 31.5 - 35.5 | - | - |
| Volatile Organic Content (VOC, less exempt) | 278.0 | Grams PerLiter | - |
| Dry Time to Handle (77°F, 50% RH) | 1.5 | Hours | - |