Knowde Enhanced TDS
Identification & Functionality
- Product Type
- Technologies
- Product Families
Features & Benefits
- Labeling Claims
- Ready-to-Use Product Features
Applications & Uses
- Markets
- Applications
- Application Method
- Applications & Uses
Dry Times
When multiple coats are applied, the dry time between coats depends upon film thickness, temperature and humidity. If the first coat is in the critical cure stage it may be lifted or blistered by the second coat. To test, apply a small swatch over first coat and observe for a few minutes. If no film distortion occurs, it is safe to recoat. When in doubt, allow one week before recoating.
Application
- Preparation: - Apply to properly cleaned or treated surface. This may consist of solvent wiping, wire brushing, sandblasting, phosphate treatment or chemical etching. All surfaces must be free of dust, oils and other surface contaminates before application.
- Reduction: If reduction is necessary use water
- Method: Spray, Airless or Electrostatic if controlled. Application properties can be adjusted with special solvents
- Recommended Dry Film 1-1.5 mils
- Primer: N/A
- Temperature: Ambient temperature above 50 deg. F
Clean Up
Recommended for clean-up is Water.
Properties
- Physical Properties
Value | Units | Test Method / Conditions | |
Viscosity | 55 - 65 | K.U. | - |
Gloss | min. 75 | - | - |
Solids by Volume | 11.5 - 15.5 | % | - |
Dry Time to Touch (77 °F, 50% RH) | 30.0 | minutes | - |
Dry Time to Recoat (77 °F, 50% RH) | 4.0 | Hours | - |
Weight Per Gallon | 8.65 | g/gallon | - |
Specific Gravity | 1.037 | - | - |
Theoretical Coverage (I mil dry, No loss assumed) | 208.0 | sq. ft. per gallon | - |
Solids by Weight | 13 - 17 | % | - |
Volatile Organic Content (VOC, less exempt) | 133.0 | Grams Per Liter | - |
Dry Time to Handle (77°F, 50% RH) | 30 - 60 | minutes | - |