Knowde Enhanced TDS
Identification & Functionality
- Product Type
- Technologies
- Product Families
Features & Benefits
- Labeling Claims
- Ready-to-Use Product Features
- Features & Benefits
- Solvent-free
- Less Than 3% Vocs
- Dries Crystal Clear
- UV Resistant
- Extreme Flexibility
- Permanent Bond
- Excellent Water Resistance
- Abrasion Resistant
Applications & Uses
- Applications
- Application Area
- Compatible Substrates & Surfaces
- Where To Use / Applications
- The waterproof formula and all-weather performance makes shoe goo ll excellent for permanently repairing/protecting all types of footwear
- perfect shoe, boot & skate repair adhesive.
- seals and protects all types of shoes, work boots, gloves & more to avoid premature wear.
- Excellent adhesion to leather, canvas, suede, rubber, fabric & much more
- Directions And Application Notes
Before use: Read directions and test small area for adhesion. Surface should be clean, dry and free of dirt. For best adhesion on smooth, non-porous materials, lightly roughen surface before use. Ideal application temperature range is 50 to 95 ºF (10 to 35 ºC). Once fully cured, the adhesive can withstand temperatures from -40 to 200 ºF (-40 to 93 ºC) intermittently.
- Unscrew cap. Puncture seal in neck of tube using pointer cap.
- For repairs: Apply directly to surfaces to be bonded or repaired. For repairing rubber and non-porous surfaces: Gently roughen area to be bonded, wipe area with alcohol, allow to dry. Spritz with water and apply glue & mate the substrates. Pull substrates apart and squeeze back together. For waterproofing and protecting: Apply using thin layers (spread with a disposable tool) to build a thick coating, allowing each layer to set 3-4 hours. For waterproofing rubber and non-porous surfaces: Gently roughen area to be bonded, wipe area with alcohol, allow to dry. Spritz with water and apply using thin layers as described above.
- Application To Wet Surfaces : For quick emergency repairs, lightly mist the substrate with moisture prior to applying adhesive. Application on damp and wet surfaces may slightly affect adhesion.
- Remove air in the tube by squeezing product up nearly to the end of the opening, then tightly recap.
- Allow 24-48 hours for full cure. Depending on substrates and temperature, maximum bond strength may not be reached for up to 3 days.
- Clean uncured adhesive with rubbing alcohol, mineral spirits, acetone or a dry cloth. Cured material may be removed with mineral spirits or by cutting or scraping. Not recommended for use on acrylic, vinyl, foam, polyethylene and polypropylene. For applications on vinyl materials, use Original Shoe GOO. Store in a cool, dry place
Properties
- Typical Properties
| Value | Units | Test Method / Conditions | |
| Application Temperature | 50 - 95 (10 - 35) | °F (°C) | — |
| Density | 8.9 | lbs/gallon | — |
| Elongation | 175.0 | % | ASTM D-412 |
| Freeze/Thaw Stability | -20 (-28) | °F (°C) | — |
| Full Cure Time | 24 - 48 | hrs | — |
| Non-Flammable (Cured And Uncured Material) | Yes | — | — |
| Service Temperature | -40 to 200 (-40 to 93) | °F (°C) | — |
| Storage | Store in a cool, dry area. | — | — |
| Tack-Free Time (70ºF / 50% Relative Humidity) | 120.0 | minutes | — |
| Viscosity (23°C, 11 Per Second) | 50,000 to 60,000 | cP | — |
| Working Time | Approx. 20 | minutes | — |
Regulatory & Compliance
- Certifications & Compliance
Storage & Handling
- Shelf Life
- 18 months