Knowde Enhanced TDS
Identification & Functionality
- Product Type
- Thickener Type
- Technologies
- Product Families
Features & Benefits
- Ready-to-Use Product Features
- Key Features
- 100% PAO 6 Base Stock for outstanding low-temperature properties & high-speed application.
- Superior protection from rust and corrosion, Good pump ability Long life grease.
- Excellent resistance to water washout and spray off. Corrosion protection
- Exceptional thermal stability over a wide temperature range.
- Environmentally friendly since the formulation contains no antimony, barium, chlorine,
- Phosphorus, zinc or free sulfur excellent behavior to temperatures.
Applications & Uses
- Applications
Properties
- Texture
- Smooth
- Physical Properties
- Typical Properties
| Value | Units | Test Method / Conditions | |
| 4-Ball EP (LWI) | 0.45 | kgf | ASTM D2596 |
| EMCOR Corrosion (3% NaCl) | 2.2 | - | ASTM D6138 |
| Hardness Change (Durometer A points) | 2.4 | - | - |
| Elastomer Compatibility | 4.8 | - | ASTM D4289 |
| Base Oil Viscosity (40°C) | 4.9 | cSt | ASTM D445 |
| Base Oil Viscosity (40°C) | 22.5 | cSt | ASTM D445 |
| Worked Penetration (10,000 Double Strokes with 10% Water, % Change) | 25.0 | % | ASTM D217 |
| Bomb Oxidation (100 hours at 99°C, PSI Drop, Oil) | 30.0 | - | ASTM D942 |
| Roll Stability (% change) | 50.0 | % | ASTM D1831 |
| Viscosity Index | 141.3 | - | ASTM D445 |
| Timken OK Load | 400.0 | kg | ASTM D2509 |
| CR Type 70 hours at 100°C | -1.6 | - | AMS 3217/3B |
| NBR-L Type 70 hours at 150°C (Low) | -2.9 | - | AMS 3217/2B |
| Water Spray Off (% removed) | 1b | - | ASTM D4049 |
| Bearing Life Performance | max. 1 | hours | ASTM D3527 |
| Worked Penetration (10,000 Double Strokes, % Change) | max. 3.0 | % | ASTM D217 |
| Water Washout (% removed) | max. 0.5 | % | ASTM D1264 |
| Wheel Bearing Leakage | max. 1 | grams | ASTM D4290 |
| Weld Point | max. 10 | - | ASTM D2596 |
| Bearing Rust Protection | max. 3 | - | ASTM D1743 |
| Fog Corrosion (1 mil d.f.t.) | min. 150 | hours | ASTM B117 |
| Dropping Point | min. 316 | °C | ASTM D2265 |
| Fretting Wear | min. 500 | mg | ASTM D4170 |
| 4-Ball Wear (mm) | Pass Salt | - | ASTM D2266 |
| Value | Units | Test Method / Conditions | |
| Temperature Torque (-18°C) | 4.0 | N.m | ASTM D4693 |