Knowde Enhanced TDS
Identification & Functionality
- Additives Included
- Chemical Family
- Polymer Name
- Technologies
- Product Families
- Type
Low Voltage FR Polyolefin Insulation
Features & Benefits
- Labeling Claims
Applications & Uses
- Applications
- Plastics & Elastomers End Uses
- Plastics & Elastomers Processing Methods
- Applications
- Wire insulated with EXCELENE 3125 is suitable for 125°C AWM, appliance, automotive, and other low voltage applications.
Properties
- Mechanical Properties
- Thermal Properties
- Electrical Properties
| Value | Units | Test Method / Conditions | |
| Elongation | 375 | % | — |
| Specific Gravity | 1.25 - 1.29 | — | — |
| Tensile Strength | 2400 | psi | — |
| Value | Units | Test Method / Conditions | |
| Retained Elongation (14 days in 136°C air oven) | 100 | % | — |
| Retained Elongation (7 Days in 136°C Air Oven) | 100 | % | — |
| Retained Elongation (7 Days in 158°C Air Oven) | 105 | % | — |
| Retained Tensile (14 days in 136°C air oven) | 110 | % | — |
| Retained Tensile (7 days in 136°C air oven) | 110 | % | — |
| Retained Tensile (7 days in 158°C air oven) | 110 | % | — |
| Value | Units | Test Method / Conditions | |
| Insulation Resistance (After 24 hrs) | 23 | MegOhm-1000ft | — |
| Insulation Resistance (After 7 days) | 30 | MegOhm-1000ft | — |
Regulatory & Compliance
- Certifications & Compliance
- Chemical Inventories
- Quality Standards
- Specifications
- When extruded and cured consistent with standard safe wire and cable industry practices, wire insulated with EXCELENE 3125 is recognized by UL AWM styled including UL 1581 for 125C XLPO
- Certification
- Certified Test Results including physical test data are included with each shipment.
Technical Details & Test Data
- Processing
Excelene 3125 compounds are engineered to be processed on conventional extrusion equipment. Use of a L/D 15:1 to 24:1 extruder with a single flight, general purpose, tapered screw for proper homogenization and fluxing of Excelene 3125 compound is recommended to obtain optimal output and properties. The compound supplied is in the cleanest state and is of the highest quality; however, the use of a breaker plate with a screen pack of approximately 20/40 mesh is recommended for optimal rheological flow and steady back pressure.
Pre-drying of the compound is not necessary, provided that the compound has been stored unopened in a cool, dry area.
The following conditions are given as a guide for processing:Temperature Profile:
(104°C) flat profile is recommended when extruding Excelene 3125.
Packaging & Availability
- Packaging Type
- Packaging
- 1,750 pounds (794 Kg) per box.
Storage & Handling
- Storage
- Excelene 3125 containers should be stored at temperatures below 50C (120F) in a dry area. Product is recommended to be used within 12 months.
- Handling
- To ensure health and safety, Material Safety Data Sheets (MSDS) are available and should be consulted prior to use.