Knowde Enhanced TDS
Identification & Functionality
- Additives Included
- Chemical Family
- Polymer Name
- Technologies
- Product Families
- Type
Low Voltage FR Polyolefin Insulation
Features & Benefits
- Labeling Claims
Applications & Uses
- Applications
- Cure Method
- Plastics & Elastomers End Uses
- Plastics & Elastomers Processing Methods
- Applications
- Wire insulated with EXCELENE 3152 is suitable for 150C AWM, appliance, automotive, and other low voltage applications.
Properties
- Mechanical Properties
- Thermal Properties
- Electrical Properties
Value | Units | Test Method / Conditions | |
Elongation | 360 | % | — |
Specific Gravity | 1.35 - 1.39 | — | — |
Tensile Strength | 2400 | psi | — |
Modulus (100%) | 790 | psi | — |
Value | Units | Test Method / Conditions | |
Cold Bend Test (1 hr at -40°C) | Pass | — | — |
FT2 Flame Test | Pass | — | — |
Heat Shock (1 hr at 180°C) | Pass | — | — |
Horizontal Flame Test: | Pass | — | — |
Retained Elongation (7 days in 180°C air oven) | 96 | % | — |
Retained Tensile (7 days in 180°C air oven) | 98 | % | — |
Value | Units | Test Method / Conditions | |
Dielectric Strength Breakdown Test (7 Days at 158°C) | 800 | V/mil | — |
Dielectric Strength Breakdown Test (7 Days at 180°C) | 800 | V/mil | — |
Dielectric Strength Breakdown Test (Unaged) | 900 | V/mil | — |
Insulation Resistance (After 24 hrs) | 5.00E+15 | MΩ-1K | — |
Regulatory & Compliance
- Certifications & Compliance
- Chemical Inventories
- Quality Standards
- Specifications
When extruded and cured consistent with standard safe wire and cable industry practices, wire insulated with EXCELENE 3152 is suitable for UL rated 150 C AWM styles including style 3321 per UL 1581 for 150C XLPO and CSA CL1503 AWM, class I, group A/B, single-conductor construction rated 150C, 600V, FT2 cable applications.
- Certification
- Certified Test Results including physical test data are included with each shipment.
Technical Details & Test Data
- Processing
Excelene 3152 compounds are engineered to be processed on conventional extrusion equipment. Use of a L/D 15:1 to 24:1 extruder with a single flight, general purpose, tapered screw for proper homogenization and fluxing of Excelene 3152 compound is recommended to obtain optimal output and properties. The compound supplied is in the cleanest state and is of the highest quality; however, the use of a breaker plate with a screen pack of approximately 20/40 mesh is recommended for optimal rheological flow and steady back pressure.
Pre-drying of the compound is not necessary, provided that the compound has been stored unopened in a cool, dry area.
The following conditions are given as a guide for processing:Temperature Profile:
(104 °C) flat profile is recommended when extruding Excelene 3152.
Packaging & Availability
- Packaging Type
- Packaging
- 1,750 pounds (794 Kg) per box.
Storage & Handling
- Storage
- Excelene 3152 containers should be stored at temperatures below 50C (120F) in a dry area. Product is recommended for use within 12 months.
- Handling
- To ensure health and safety, Material Safety Data Sheets (MSDS) are available and should be consulted prior to use.