Knowde Enhanced TDS
Identification & Functionality
- Additives Included
- Chemical Family
- Polymer Name
- Technologies
- Product Families
- Type
Battery Cable EPR/Polyolefin Insulation
Features & Benefits
- Labeling Claims
Applications & Uses
- Applications
- Cure Method
- Plastics & Elastomers End Uses
- Plastics & Elastomers Processing Methods
- Applications
- Cable insulated with EXCELENE 5000 is designed for use in flexible battery cables, welding, and many other low voltage applications.
- Applications
Automotive
Properties
- Mechanical Properties
- Thermal Properties
Value | Units | Test Method / Conditions | |
Elongation | 350 | % | — |
Specific Gravity | 1.4 | — | — |
Tensile Strength | 1700 | psi | — |
Value | Units | Test Method / Conditions | |
Automatic Transmission (at 50°C) | 3.8 | % | — |
Battery Acid (Room Temp) | 0 | % | — |
Engine Coolant (at 50°C) | 0 | % | — |
Fuel (at 23°C) | 0.4 | % | — |
IRM 902 (at 50°C) | 3.8 | % | — |
IRM 903 (at 50°C) | 7 | % | — |
Retained Elongation (7 days in 110°C air oven) | 95 | % | — |
Retained Elongation (7 days in 155°C air oven) | 85 | % | — |
Retained Tensile (3000 hours in 125°C air oven) | Pass | % | — |
Retained Tensile (7 days in 110°C air oven) | 100 | % | — |
Retained Tensile (7 days in 155°C air oven) | 100 | % | — |
Regulatory & Compliance
- Certifications & Compliance
- Chemical Inventories
- Quality Standards
- Specifications
When extruded and cured consistent with standard safe wire and cable industry practices, cables insulated with EXCELENE 5000 insulation will meet or exceed the requirements as specified in the following standards:
SAE J1127 SGR- Certification
- Certified Test Results including physical test data are included with each shipment.
Technical Details & Test Data
- Processing
EXCELENE 5000 is engineered for processing on conventional extrusion equipment. Use of a L/D 15:1 to 24:1 extruder with a single flighted, general purpose, tapered screw for proper homogenization and fluxing of EXCELENE 5000 compound is recommended to obtain optimal output and properties. The compound supplied is in the cleanest state and is of the highest quality; however, the use of a breaker plate with a screen pack of approximately 20/40 or 20/60 mesh is recommended for optimal rheological flow and steady back pressure.
Pre-drying of the compound is not necessary, provided that the compound has been stored unopened in a cool, dry area.
Packaging & Availability
- Packaging Type
- Packaging
- 1,750 pounds (794 Kg) per box, sealed.
Storage & Handling
- Handling
- To ensure health and safety, Material Safety Data Sheets (MSDS) are available and should be consulted prior to use.
- Storage
- EXCELENE 5000 containers should be stored at temperatures below 50°C in a dry area to avoid massing of pellets. Product is recommended for use within 12 months.