Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Polymer Name
- Technologies
- Product Families
Features & Benefits
- Labeling Claims
Applications & Uses
- Applications
- Cure Method
- Plastics & Elastomers End Uses
- Plastics & Elastomers Processing Methods
- Applications
- Cables insulated with SUPEROHM® 2565 are suitable for industrial, mining, photovoltaic, control, windfarm, and other low-medium voltage, long life applications where high resistance to heat is required for wire and cable products rated up to 5 kV.
Properties
- Color
- Mechanical Properties
- Thermal Properties
- Electrical Properties
| Value | Units | Test Method / Conditions | |
| Elongation | 140 | % | — |
| Specific Gravity | 1.13 - 1.17 | — | — |
| Tensile Strength | 2200 | psi | — |
| Value | Units | Test Method / Conditions | |
| Retained Elongation (902 Oil Immersion - 168 Hours at 150°C) | 61 | % | — |
| Retained Elongation (902 Oil Immersion - 18 Hours at 121°C) | 60 | % | — |
| Retained Tensile (902 Oil Immersion 168 Hours at 150°C) | 68 | % | — |
| Retained Tensile (902 Oil Immersion 18 Hours at 121°C) | 70 | % | — |
| Value | Units | Test Method / Conditions | |
| Dielectric Constant | 2.65 | — | — |
Regulatory & Compliance
- Chemical Inventories
- Quality Standards
- Specifications
When extruded and cured consistent with standard safe wire and cable industry practices, cable insulated with SUPEROHM® 2565 EPR insulation will comply with the requirements as specified in the following standards:
UL 44 (14 AWG)
RHH, RHW, RHW-2
USE, USE-2
SIS- Certification
- Certified Test Results including physical test data are included with each shipment.
Technical Details & Test Data
- Processing
SUPEROHM® 2565 compound is engineered to be processed on conventional extrusion equipment. It is recommended that this product is processed using a shallow screw, cross channel obstruction such as mixing rings should be avoided. Metering screw with 2.5-3:1 compression ratio in 15/1 through 20/1 extruders should produce satisfactory results. The compound supplied is in the cleanest state and is of the highest quality; however, the use of a breaker plate with a screen pack of approximately 20/40 or 20/60 mesh is recommended for optimal rheological flow and steady back pressure.
Pre-drying of the compound is not necessary, provided that the compound has been stored unopened in a
cool, dry area.
The following conditions are given as a guide for processing (single extrusion):Temperature Profile:
°F
°C
Screw:
170-180
77-82
Zone 1 (feed):
210-220
99-105
Zone 2:
210-220
99-105
Zone 3:
210-220
99-105
Zone 4:
210-220
99-105
Crosshead
220-230
105-110
Packaging & Availability
- Packaging Type
- Packaging
- To ensure health and safety, Material Safety Data Sheets (MSDS) are available and should be consulted prior to use.
Storage & Handling
- Storage
- SUPEROHM® 2565 containers should be stored at temperatures below 50°C (120°F) in a dry area to avoid massing of pellets. Product is recommended to be used within 12 months.
- Handling
- To ensure health and safety, Material Safety Data Sheets (MSDS) are available and should be consulted prior to use.