Knowde Enhanced TDS
Identification & Functionality
- Additives Included
- Chemical Family
- Polymer Name
- Technologies
- Product Families
Features & Benefits
- Labeling Claims
Applications & Uses
- Applications
- Cure Method
- Plastics & Elastomers End Uses
- Plastics & Elastomers Processing Methods
- Applications
- Cables insulated with SUPEROHM 2582 are suitable for 125°C AWM appliances, apparatus and motor leads applications.
Properties
- Color
- Mechanical Properties
- Thermal Properties
- Electrical Properties
| Value | Units | Test Method / Conditions | |
| Elongation | 400 | % | — |
| Specific Gravity | 1.28 - 1.32 | — | — |
| Tensile Strength | 1700 | psi | — |
| Value | Units | Test Method / Conditions | |
| Dielectric Breakdown after (7 days at 158°C) | Pass | — | — |
| Dielectric Strength (2kV for 60 sec) | Ok | — | — |
| Dielectric Strength at Rated Temperature (at 125°C) | Pass | — | — |
| Dielectric Strength at Room Temperature | Pass | — | — |
| Heat Distortion | 15 | °C | — |
| Retained Elongation (7 days in 136°C air oven) | 75 | % | — |
| Retained Elongation (7 days in 158°C air oven) | 92 | % | — |
| Retained Tensile (7 days in 136°C air oven) | 90 | % | — |
| Retained Tensile (7 days in 158°C air oven) | 97 | % | — |
| UL Horizontal | Pass | — | — |
| Value | Units | Test Method / Conditions | |
| Insulation Resistance (After 7 days) | 300 | M- Ω /1000ft | — |
Regulatory & Compliance
- Certifications & Compliance
- Chemical Inventories
- Quality Standards
- Specifications
- When extruded and cured consistent with standard safe wire and cable industry practices, cable insulated with SUPEROHM® 2582 EPDM insulation will comply with the requirements of UL 758 (125°C rated) as well as CSA CL1055, CL 1254 and 1255.
- Certification
- Certified Test Results including physical test data are included with each shipment.
Technical Details & Test Data
- Processing
SUPEROHM® 2582 compound is engineered to be processed on conventional extrusion equipment. Metering screw with 2.5-3:1 compression ratio in 15/1 through 24/1 extruders should produce satisfactory results. The compound supplied is in the cleanest state and is of the highest quality; however, the use of a breaker plate with a screen pack of approximately 20/40 or 20/60 mesh is recommended for optimal rheological flow and steady back pressure.
Pre-drying of the compound is not necessary, provided that the compound has been stored unopened in a cool, dry area.
The following conditions are given as a guide for processing (single extrusion):Temperature Profile:
°F
°C
Screw:
160-170
71-76
Zone 1 (feed):
210-220
99-105
Zone 2:
210-220
99-105
Zone 3:
210-220
99-105
Zone 4:
210-220
99-105
Head:
210-220
99-105
Die:
160-180
71-82
Packaging & Availability
- Packaging Type
- Packaging
- 1,750 pounds (794 Kg) per box.
Storage & Handling
- Storage
- SUPEROHM® 2582 containers should be stored at temperatures below 50°C (120°F) in a dry area to avoid massing of pellets. Product is recommended to be used within 12 months.
- Handling
- To ensure health and safety, Material Safety Data Sheets (MSDS) are available and should be consulted prior to use.