Products

BENTONE GEL ISD V provides thermostable viscosity control of the emulsion's oil phase, improves application properties, enhances skin-feel by masking greasy or tacky components and imparts a pleasant residual silkiness to the skin.

This grade is designed to impart rheological control and suspension to organic- and silicone-based cosmetics. BENTONE GEL VS-5 PC V is a specially prepared dispersion of an organically modified hectorite in a D5 silicone.

BENTONE GEL GTCC V is particularly useful in anhydrous systems, emulsions and can be used in cold process systems. It provides thermostable viscosity control of the emulsion's oil phase, improves application properties, enhances skin-feel by masking greasy or tacky components and imparts a pleasant residual silkiness to the skin.

MICRO-DRY 323 is the most popular aerosol grade of standard Aluminum Chlorohydrate. An impalpable aluminum chlorohydrate with 97% minimum < 45 microns.

CHLORHYDROL 50 is a 50% aqueous solution of standard aluminum chlorohydrate, specially designed for use in aqueous, emulsion, and clear roll-ons as well as aqueous creams and clear gels.

AAZG-531 is a high performance, enhanced efficacy active ingredient intended for use in anhydrous suspension sticks, roll-ons and creams.

BENTONE HYDROCLAY™ 900 is a blend of hectorite and Hydroxyethylcellulose. This combination provides greater electrolyte stability than using the clay alone. The combination provides good thickening with pseudoplastic rheology.

BENTONE HYDROCLAY™ 2000 is our most efficient hydrophilic rheology modifier and is based on hectorite. Due to its small size, platelet shape, and large surface area, BENTONE HYDROCLAY™ 2000 is able to form strong, stable viscous gels with thixotropic flow behavior.

REACH 301L is an acid-activated aqueous solution of aluminum sesquichlorohydrate that provides better sweat reduction than standard ACH due to its lower Al:Cl molar ratio. The Al:Cl molar ratio is controlled at the higher end of its allowed range to maintain better skin and fragrance compatibility.

RHEOLUXE 880 is a polymeric thickener designed to impart rheological control and film forming benefits in aqueous and emulsion systems. It is a highly efficient rheological modifier for use in formulations with difficult to thicken conditions such as extreme pH or high electrolyte concentration.

MICRO-DRY 331 has a very low particle size which provides homogeneity of the active in anhydrous suspension systems along with a smooth, non-gritty payoff.

BENTONE LUXE WO creates extremely stable emulsions with a very light texture. Emulsions containing BENTONE LUXE WO apply easily without leaving a greasy film on the skin. This light texture allows for high oil concentrations that can be used for dry, damaged skin, yet feels light and silky for even oily skin types. This unique ability to deliver high loads of oil with a dry elegant skin feel make BENTONE LUXE WO ideal for all skin types.

ULTRA ZAG 88L is a patented high performing solution of aluminum zirconium tetrachlorohydrex glycine comprised of the optimum Zr polymer species and an additive to maintain extended stability over time.

AAZG-7167 is a high performance, enhanced efficacy active ingredient intended for use in anhydrous suspension sticks, soft solids, roll-ons and creams.

Bentone Gel® DM5 V is a specially prepared dispersion of a non-animal origin organically modified hectorite clay in dimethicone. Bentone Gel® DM5 V delivers a combination of benefits in a single, easy to use product. It is designed to impart rheological control and suspension to both organic and silicone based cosmetics. It is an easily spreadable, non-oily emollient, which leaves a soft, non-tacky skin feel. Bentone Gel® DM5 V is also particularly useful in emulsions and can be used in "cold process" systems. Bentone Gel® DM5 V is an excellent alternative to cyclopentasiloxane based products.

This grade is designed to impart rheological control and suspension to organic- and silicone-based cosmetics. BENTONE GEL VS-5 PC V is a specially prepared dispersion of an organically modified hectorite in a D5 silicone.

REACH 301 has a lower molecular weight and Al:Cl molar ratio than standard ACH making it more appropriate for diffusing into the deeper situated sweat glands on the feet.

This grade is designed to impart rheological control and suspension to organic- and silicone-based cosmetics. BENTONE GEL VS-5 PC V is a specially prepared dispersion of an organically modified hectorite in a D5 silicone.

REACH 501L is specially designed for use in aqueous, emulsion and clear roll-ons as well as aqueous creams and clear gels. The product is also suitable for

RHEOLUXE 812 is a highly efficient rheological modifier for use in formulations with difficult to thicken conditions such as extreme pH or high electrolyte concentration. RHEOLUXE 812 can be used in “cold process” systems. It is a non-ionic thickener, which provides shear thinning viscosity control without affecting the formula esthetics; allowing light textures to remain light and soft to the touch.

BENTONE HYDROCLAY™ 1100 is a vegan rheological additive based on purified smectite clay. It imparts thixotropy and good anti-settling properties in the water phase of cosmetics. It is particularly effective as a means of improving suspension control without unduly increasing viscosity. BENTONE HYDROCLAY™ 1100 is an acid- stable clay and has the ability to absorb oils in skin treatments.

BENTONE GEL PTIS V delivers a combination of benefits in a single, easy to use product. It is designed to impart rheological control and suspension to the organic- and silicone-based cosmetics, while providing cushion emollience, persisting and lubricious skin feel, high pigment wetting, and glossing films.

BENTONE GEL SS71 V delivers a combination of benefits in a single, easy to use product. It is designed to impart rheological control and suspension to organic- and silicone-based cosmetics.

BENTONE HYDROCLAY™ 2001 is our most effi cient hydrophilic rheology modifier and is based on hectorite. Due to its small size, platelet shape, and large surface area, BENTONE HYDROCLAY™ 2001 is able to form strong, stable viscous gels with thixotropic fl ow behavior. BENTONE HYDROCLAY™ 2001 is irradiated for microbial control.

BENTONE LUXE WN creates extremely stable emulsions with the ability to create a variety of textures. Emulsions containing BENTONE LUXE WN apply easily without leaving a greasy film on the skin. This emulsifying gel can create water in oil systems containing extremely high water content, creating a hydrating sensation.

BENTONE GEL TMF V is an alternative to rheological additives containing Cyclopentasiloxane, traditional polymers and Cellulose-based thickeners for stabilizing emulsions.

MICRO-DRY 3115 is standard aluminum chlorohydrate and is ideally suited for use in anhydrous suspension aerosols. It is used by some marketers due to its slightly coarser particle size distribution.

REACH 103 is a high performance enhanced efficacy active ingredient recommended for use in anhydrous suspension aerosols.

REZAL 67 is an aluminum zirconium active that provides better sweat reduction than Al-only actives

BENTONE GEL IHD V improves application properties, enhances skin-feel by masking greasy or tacky components and imparts a pleasant residual silkiness to the skin.

AASCH-3143 is our most effective enhanced efficacy aluminum sesquichlorohydrate powder for use in anhydrous suspension aerosols. AASCH-3143 provides superior protection against wetness and odor in anhydrous antiperspirant aerosols. Normal application will provide a minimum of 24 hours wetness and odor protection.

ACH-321 is an aluminum chlorohydrate crystal for dissolution in water and is a spray dried form of Chlorhydrol 50.

AZG-364 is specially prepared for dissolving in aqueous formulations, and results in a stable viscosity profile.

BENTONE GEL® IPM V is an alternative to traditional polymer or cellulose-based thickeners for stabilizing emulsions.

REACH AZP-908 is an enhanced efficacy/activated superfine powder with a very low particle size, which provides homogeneity of the active in anhydrous suspension

BENTONE GEL OLV V can be used in "cold process" systems. It provides thermostable viscosity control of the emulsion's oil phase, improves application properties, enhances skin-feel by masking greasy or tacky components and imparts a pleasant residual silkiness to the skin.