Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Polymer Name
- Technologies
- Product Families
Features & Benefits
- Materials Features
Applications & Uses
- Markets
- Plastics & Elastomers End Uses
- Plastics & Elastomers Processing Methods
Properties
- Physical Form
- Mechanical Properties
- Physical Properties
- Thermal Properties
- Electrical Properties
Value | Units | Test Method / Conditions | |
Charpy Impact Resistance | 10.9 | kJ/m² | ISO 179 |
Elongion Tensile Strength | 3.1 | % | ISO 527 |
Tensile Elongation Break | 6.4 | % | ISO 178 |
Tensile Modulus | 1 | MPa | ISO 527 |
Tensile Strength | 24.3 | MPa | ISO 527 |
Tensile Stress Break | 19.8 | MPa | ISO 527 |
Value | Units | Test Method / Conditions | |
Density | 1.03 | g/cm³ | ISO 1183 |
Shore Hardness | 66.7 | D | ISO 868 |
Value | Units | Test Method / Conditions | |
Glass Transistion Temperature | 106 | °C | ISO 11357 |
Value | Units | Test Method / Conditions | |
Surface Resistivity | 107 - 109 | Ohms/m² | ASTM D257 |
Regulatory & Compliance
- Certifications & Compliance
Technical Details & Test Data
- Print Recommendation
Nozzle Temperature 250-270 °C Bed Temperature 100°C Print Speed 40 mm/s Drying recommendations 2-4 hours, 80°C
Storage & Handling
- Additional info
To get the best results while printing we advise you to keep the 3D printer in a room where there is hardly any draft and/or temperature fluctuations. Keep the 3D printer out of direct sunlight. When the 3D printer is not being used it is important to keep the 3D4Makers ABS ESD filament in a bag and stored in a cool, dry and dark place until it is used again.