Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Polymer Name
- Technologies
- Product Families
Features & Benefits
- Labeling Claims
Applications & Uses
- Plastics & Elastomers End Uses
- Plastics & Elastomers Processing Methods
Properties
- Color
- Physical Form
- Physical Properties
- Mechanical Properties
- Thermal Properties
| Value | Units | Test Method / Conditions | |
| Density | 1.1 | g/cm³ | ISO 1183-1 |
| Shore D Hardness | 46 | — | ISO 868 |
| Value | Units | Test Method / Conditions | |
| Elongation at Yield (Tensile Sample Thickness 1.5 mm) | 15 | % | ISO 527-1 |
| Flexural Modulus | 380 | MPa | ISO 178 |
| Flexural Strength | 18 | MPa | ISO 178 |
| Izod Impact Strength (Notched) | 8 | kJ/m² | ISO 180-1 |
| Tensile Modulus (Tensile Sample Thickness 1.5 mm) | 350 | MPa | ISO 527-1 |
| Tensile Strength (Tensile Sample Thickness 1.5 mm) | 45 | MPa | ISO 527-1 |
| Value | Units | Test Method / Conditions | |
| Heat Deflection Temperature (120 K/H) | 57 | °C | ISO 75 B |
Regulatory & Compliance
- Certifications & Compliance
Technical Details & Test Data
- Print Recommendation
Nozzle Temperature 130 - 170 °C Bed Temperature 30 - 45 °C Print Speed 20 - 40 mm/s Bed Adhesion Smoothpaper / PEI Sheet
Storage & Handling
- Additional info
For many 3D printers, Ortho will print best at approximately 140°C with a bed temperature of 38°C and a speed of 30 mm/s. In designs with significant overhangs and bridges, best results are obtained with fans at 100%. To get the best results while printing we advise you to keep the 3D printer in a room where there is hardly any dra and/or temperature fluctuations. Keep the 3D printer out of direct sunlight. When the 3D printer is not being used it is important to keep the 3D4Makers Facilan™ Ortho filament in a bag and stored in a cool, dry and dark place until it is used again.