Products

Luvocom® 3F PAHT 9825 NT Filament is a unreinforced High-temperature polyamide. Its water uptake takes about 4 times longer to reach the saturation point compared to unmodified PA6, also its saturation point is 5 times lower than conventional PA6 materials. This particular engineering polymer grade is tailored made for the 3D printing industry to match the injection molding strength requirements and focusing on the serial production of end-parts. The filament can be used on conventional FFF / FDM 3D printing systems due to the enhanced printability, improved layer bonding and the unrequired use of a heated chamber.

TPC-91A Filament is a thermoplastic copolyester elastomer with both thermoplastic and elastomeric properties. TPC Filament is easier to print compared to other flexible filaments like TPU. The layer bonding in the Z direction of this material is extremely good meaning that it's almost impossible to detach the printed layers. Typical applications for this material are drive belts, vibration dampers, phone cases, wearables and other objects that need to take a lot of wear.

Luvocom® 3F PAHT CF 9891 BK Filament is a high temperature carbon fiber (15%) reinforced polyamide (PA). This grade is based on PA6 and is easy to print with low warping and improved layer bonding is optimized for industrial applications. Typical industries where it is commonly used are in robotics, drones, automotive, aerospace and also widely in the field of functional prototypes and end parts. This particular engineering polymer grade is tailored made for the 3D printing industry to match the injection molding strength requirements and focusing on the serial production of end-parts, the filament can be used on conventional FFF / FDM 3D printing systems without an heated chamber.