Knowde Enhanced TDS
Identification & Functionality
- Polymer Name
- Technologies
Features & Benefits
- Materials Features
Applications & Uses
- Applications
- Plastics & Elastomers End Uses
- Plastics & Elastomers Processing Methods
Properties
- Color
- Mechanical Properties
- Physical Properties
- Processing Information (Injection Molding)
| Value | Units | Test Method / Conditions | |
| Tensile Strength at Yield | 23 | MPa | ASTM D 638 |
| Rockwell Hardness | 60 | Scale R | ASTM D785 |
| Tensile Elongation at Break | 7.6 | - | ASTM D412, ISO 37 |
| Flexural Modulus | 41 | MPa | ASTM D790 |
| Taber Abrasion Resistance | 45 | mg/1000 cycles | ASTM D 1044 |
| Value | Units | Test Method / Conditions | |
| Melt Flow Rate - MFR (190°C/3.8 kg) | 20 - 60 | g/10min | ASTM D1238 |
| Specific Gravity | 1.16 | - | — |
| Water Absorption | 0.002 | % | Sim. to ISO 62 |
| Value | Units | Test Method / Conditions | |
| Drying Temperature | 200 - 230 | °F | — |
| Drying Time | 2.0 - 3.0 | h | — |
| Maximum Drying Time | 8 | h | — |
| Suggested Maximum Moisture | 0.0003 | % | — |
| Suggested Shot Size | 40 - 75 | % | — |
| Rear Barrel Temperature | 340 - 380 | °F | — |
| Middle Barrel Temperatures | 350 - 390 | °F | — |
| Front Barrel Temperatures | 360 - 400 | °F | — |
| Nozzle Temperature | 390 410 | °F | — |
| Back Pressure | 25 - 100 | psi | — |
| Mold Temperature | 60 - 110 | °F | — |
| Screw Speed | 40 - 80 | rpm | — |
| Vent Depth | 0.0005 - 0.0015 | in | — |
| Melt Temperature | 380 - 410 | °F | — |