Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Fillers Included
- Polymer Name
- Industrial Additives Functions
- Plastics & Elastomers Functions
- Technologies
Features & Benefits
- Materials Features
- Main Features
- For hot compression molding
- High electrical conductivity
- High thermal conductivity
Applications & Uses
- Applications
- Industrial Additives End Use
- Plastics & Elastomers End Uses
- Plastics & Elastomers Processing Methods
Properties
- Color
- Mechanical Properties
- Thermal Properties
- Typical Properties
- Electrical Properties
- Other Properties
| Value | Units | Test Method / Conditions | |
| Bending Strain | 0.1 | % | DIN EN ISO 178 |
| Charpy Impact Strength | 1.5 | kJ/m2 | DIN EN ISO 179-1eU |
| Flexural Strength | 33 | MPa | DIN EN ISO 178 |
| Modulus of Elasticity (Flexural test) | 12300 | MPa | DIN EN ISO 178 |
| Value | Units | Test Method / Conditions | |
| Heat Distortion Temperature (HDTA) | 148 | °C | ISO-R 75 Method A |
| Melting Temperature | 165 | °C | DIN EN ISO 11357 |
| Service Temperature (long term) | 90 | °C | — |
| Service Temperature (short term) | 130 | °C | — |
| Specific Heat | 0.8 | J/(g*K) | DIN EN 821 |
| Thermal Conductivity (in-plane) | 66 | W/(K*m) | DIN EN 821 |
| Thermal Conductivity (through-plane) | 20 | W/(K*m) | DIN EN 821 |
| Thermal Diffusivity (in-plane) | 40.2 | mm2/s | DIN EN 821 |
| Thermal Diffusivity (through-plane) | 12.2 | mm2/s | DIN EN 821 |
| Value | Units | Test Method / Conditions | |
| Density | 1.94 | g/cm3 | — |
| Value | Units | Test Method / Conditions | |
| Specific Electrical Conductivity | 1.68 x 10^4 | S/m | DIN EN ISO 3915 |
| Volume Resistivity | 5.95 x 10^-5 | Ω*m | DIN EN ISO 3915 |
| Value | Units | Test Method / Conditions | |
| Bulk Density | 0.72 | g/cm3 | EN ISO 60 |
| Flammability (UL94) | HB | — | DIN IEC 60695-11-10 |
| Water Absorption (23°C / 50% relative humidity up to saturation) | max. 0.1 | % | DIN EN ISO 62 |