company tower banner
Envirosafe Manufacturing Corp. Company Logo

Envirosafe Manufacturing Corp. EASY BRICK CLEANER #46-01

Envirosafe Manufacturing Corp. Easy Brick Cleaner #46-01 is a unique formulation that removes dirt, stains and rust stains from brick surfaces, especially red and dark colored brick. (On light colored brick you can use NuLook Concrete Cleaner).

Product Type: Cleaner, Stain Removers

Application Area: Wall

Compatible Substrates & Surfaces: Brick, Concrete

Features: Grime Cleaning, Stain Removing

  • TypeDocument Name
View All Documents

Knowde Enhanced TDS

Identification & Functionality

Features & Benefits

Ready-to-Use Product Features
Product Advantages

Rust Stain Remover is economical, fast, non-flammable, non-toxic, easy clean-up, biodegradable and water soluble.

Applications & Uses

Markets
Application Area
Application Method
Compatible Substrates & Surfaces
Product Uses

For industrial, commercial and residential use on sidewalks, driveways, patios, pool decks, pavers, buildings, patios, and walls.

Job Limitations

Apply in good weather when air and surface temperatures are above 45 degrees F. and surface Temperature is at least 5 degrees F above the Dew Point. For optimum application properties, Materials should be between 70-100 degrees F. prior to application. Maintain unused material In closed containers in protected storage at 40-100 degrees F. Wear gloves and goggles for personal protection. DO NOT STORE IN STRONG SUNLIGHT. Always TEST a small area first to determine how long you may leave the product on the surface. For Exterior use only. This product is considered corrosive.

Application

Surface preparation and application instructions.

  1. If oil/grease is present then first clean surface with ENVIRO-CLEAN CLEANER/DEGREASER.
  2. Rinse with water. Let dry. Water all grass and shrubs near the area well before starting.
  3. Spray on EASY BRICK CLEANER. Let stand for approximately 3-5 minutes.
  4. Scrub any stubborn stains with stiff bristle brush.
  5. Pressure-wash off with min. 3000 psi. Rinse with plenty of water.
  6. Apply TROJAN MASONRY SEALER to protect the surface. Note: use gloves and goggles - keep from getting into eyes.

Method of Application

Sprayer & pressure washer.

Coverage Rate

250-300 sq. ft./gallon.

Properties

Physical Form
Soluble in
Water
Typical Properties
ValueUnitsTest Method / Conditions
Specific Gravity (H₂O=1, At 24°C)1.2
Evaporation RateSame as water
pH (Corrosive)1.0
ViscosityMore than water

Technical Details & Test Data

Technical Details

 Product Properties

  • Proprietary acids
  • Non-ionic biodegradable surfactant
  • Proprietary ingredients 

Safety & Health

Safety

Safe storage, handling and use dictate that adequate health and safety precautions be observed with this product. User is specifically directed to consult the current Material safety Data Sheet for this product as well as precautions contained on product labeling. This product is considered Corrosive. Notice: The technical data contained herein is true and accurate to the best of our knowledge. All products are offered and sold subject to Envirosafe Manufacturing Corps. Standard Conditions of Sale. Published technical data and instructions are subject to change without prior notice.

Packaging & Availability

Packaging Type
Container Sizes
  • 1-Gallon Bottles
  • 5-Gallon Pails
  • 55-Gallon Drums