Envirosafe Manufacturing - RED CLAY STAIN REMOVER #45-01

Knowde Enhanced TDS

Identification & Functionality

Product Type: Cleaner,
Stain Removers
Technologies: Ready-to-Use Products
Product Families: Ready-to-Use Products — Cleaners
Commercial Cleaners,
Industrial Cleaners

Features & Benefits

Labeling Claims: Biodegradable,
Non-Flammable,
Non-Toxic
Ready-to-Use Product Features: Stain Removing
Product Advantages: Red clay stain remover is economical, fast, non-flammable, non-toxic, easy clean-up, biodegradable, water soluble and considered a ‘greenproduct’.

Applications & Uses

Markets: HI&I Care
Applications: HI&I Care — Home Care
Surface Care
HI&I Care — Institutional & Industrial Care
Industrial Cleaning
Application Area: Floor
Application Method: Spray
Compatible Substrates & Surfaces: Brick,
Concrete
Product Uses: For industrial, commercial and residential use on sidewalks, driveways, patios, pool decks, walls and ramps. This product is of special value for areas of the country where red clay is a problem.
Job Limitations: Apply in good weather when air and surface temperatures are above 45 degrees F. and surface temperature is at least 5 degrees F above the Dew Point. For optimum application properties, materials should be between 70-90 degrees F. prior to application. Maintain unused material in closed containers in protected storage at 40-90 degrees F. DO NOT STORE IN STRONG SUNLIGHT.
Application: Surface preparation and application instructions.

If oil or grease is present, wash surface with ENVIRO-CLEAN CLEANER/DEGREASER.

Rinse with water. Water all grass and shrubs near area well.

Spray on RED CLAY STAIN REMOVER. Let stand for approximately 2-3 minutes.

Scrub any stubborn stains with stiff brush. Power-wash off and rinse well with water.

Let dry thoroughly. Seal surface with Trojan Masonry Sealer to make future cleaning easier. Note: use gloves, goggles and rubber boots.

Method of Application

Sprayer & pressure washer

Coverage Rate

250-300 sq. ft./gallon.

Properties

Technical Details & Test Data

Technical Details: Product Properties

Proprietary acids

Non-ionic biodegradable surfactant

Proprietary ingredients

Safety & Health

Safety: Safe storage, handling and use dictate that adequate health and safety precautions be observed with this product. User is specifically directed to consult the current Safety Data Sheet for this product as well as precautions contained on product labeling. This product is considered Corrosive.

Packaging & Availability