Knowde Enhanced TDS
Properties
- Typical Properties
Value | Units | Test Method / Conditions | |
Abrasion | max. 150 | mg | DIN 53516 |
Elongation | min. 350 | % | DIN 53504 |
Breaking Load | min. 10.0 | KN / m | DIN 53504 |
Free Density | 0.25-0.27 | - | - |
In-mold Density | 0.50-0.55 | g/cm | ISO 845:2006 |
Hardness | 58+/-3 | Shore A | DIN 53505 |
Ester/Ether | Ether/Ether | - | - |
Resistance To Flexions After Hydrolysis | 150 | - | EN ISO 7854 |
Res. Push-ups "Bennewart" incr. intalgio | max. 4 | mm | DIN 53522 |
Res. "Ross flex' cold T-20 °C 30.000 | max. 6 | mm | EN ISO 7854 |
Res. "Ross flex' room T + 20°C 30,000 | max. 6 | mm | DIN 53543 |
Packaging & Availability
- Packing
Epaflex PU systems consist of three components. The polyols are available in metal drums with a variable weight from 180 Kg. To 200 Kg., The prepolymers (ISO) in 240 Kg metal drums and the catalysts in plastic tanks with variable weights up to 50 Kg.
Storage & Handling
- Storage
Epaflex PU systems must be stored indoors in a dry place at room temperature possibly around 20 ° C and in any case not at high or too low temperatures, preferably if the environment is ventilated and cool.