Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Fillers Included
- Polymer Name
- Plastics & Elastomers Functions
- Technologies
- Product Families
Features & Benefits
- Materials Features
- Notes
Eplamid 6 glass fiber and glass sphere compounds offer a very good surface finish, dimensional stability as well as good all around mechanical properites which are used in many sectors of industry.This material is available in natural and colors on request.
Applications & Uses
- Markets
- Applications
- Plastics & Elastomers End Uses
- Plastics & Elastomers Processing Methods
Properties
- Mechanical Properties
- Physical Properties
- Thermal Properties
- Electrical Properties
- Flammability
| Value | Units | Test Method / Conditions | |
| Unnotched izod impact (23°C) | 25 | kJ/m² | ISO 180/1U |
| Flexural modulus (2mm/min) (23°C) | 5500 | MPa | ISO 178 |
| Flexural strength (2mm/min) (23°C) | 170 | MPa | ISO 178 |
| Tensile modulus (1mm/min) (23°C) | 6600 | MPa | ISO 527-2 |
| Tensile strain at break (5mm/min) (23°C) | 3 | MPa | ISO 527-2 |
| Tensile stress at break (5mm/min) (23°C) | 120 | MPa | ISO 527-2 |
| Unnotched charpy impact (23°C) | 45 | kJ/m² | ISO 179/1eU |
| Value | Units | Test Method / Conditions | |
| Mold shrinkage- parallel/normal (3mm) | 0,5/0,9 | % | ISO 294-4 |
| Ash content | 30 | % | ISO 3451-4 |
| Density (23°C) | 1,34 | g/cm3 | ISO 1183 |
| Determination of water content | 0,1 | % | ISO 1183 |
| Value | Units | Test Method / Conditions | |
| Temp. of deflection under load (1,80 MPa) | 200 | °C | ISO 75-2/A |
| Melting point | 220 | °C | ISO 3146 |
| Notched charpy impact (23°C) | 7 | kJ/m² | ISO 75-2/B |
| Notched izod impact (23°C) | 6 | kJ/m² | ISO 180/1A |
| Temp. of deflection under load (0,45 MPa) | 215 | °C | ISO 75-2/B |
| Value | Units | Test Method / Conditions | |
| Properties | 400 | V | EN 60112 |
| Value | Units | Test Method / Conditions | |
| Properties | HB | - | EN 60695-11-10 |