Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Fillers Included
- Polymer Name
- Plastics & Elastomers Functions
- Technologies
- Product Families
Features & Benefits
- Materials Features
- Notes
Eplamid 6 glass fiber reinforced compounds are used in all sectors of industry, offering a good balance of thermal and mechanical properties.This material is available in natural and colors on request.
Applications & Uses
- Markets
- Applications
- Plastics & Elastomers End Uses
- Plastics & Elastomers Processing Methods
Properties
- Mechanical Properties
- Physical Properties
- Thermal Properties
- Electrical Properties
- Flammability
| Value | Units | Test Method / Conditions | |
| Unnotched izod impact (23°C) | 45 | kJ/m² | ISO 180/1U |
| Flexural modulus (2mm/min) (23°C) | 4400 | MPa | ISO 178 |
| Flexural strength (2mm/min) (23°C) | 210 | MPa | ISO 178 |
| Tensile modulus (1mm/min) (23°C) | 5200 | MPa | ISO 527-2 |
| Tensile strain at break (5mm/min) (23°C) | 3 | MPa | ISO 527-2 |
| Tensile stress at break (5mm/min) (23°C) | 115 | MPa | ISO 527-2 |
| Unnotched charpy impact (23°C) | 50 | kJ/m² | ISO 179/1eU |
| Value | Units | Test Method / Conditions | |
| Mold shrinkage- parallel/normal (3mm) | 0,8/1,1 | % | ISO 294-4 |
| Ash content | 10 | % | ISO 3451-4 |
| Density (23°C) | 1,19 | g/cm3 | ISO 1183 |
| Determination of water content | 0,1 | % | ISO 1183 |
| Value | Units | Test Method / Conditions | |
| Notched izod impact (23°C) | 6 | kJ/m² | ISO 180/1A |
| Melting point | 220 | °C | ISO 75-2/A |
| Notched charpy impact (23°C) | 7 | kJ/m² | ISO 75-2/B |
| Value | Units | Test Method / Conditions | |
| Properties | 550 | V | EN 60112 |
| Value | Units | Test Method / Conditions | |
| Properties | HB | - | ASTM D257 |