Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Fillers Included
- Polymer Name
- Plastics & Elastomers Functions
- Technologies
- Product Families
Features & Benefits
- Materials Features
- Notes
Eplamid 6 glass fiber reinforced compounds are used in all sectors of industry, offering a good balance of thermal and mechanical properties.This material is available in natural and colors on request.
Applications & Uses
- Markets
- Applications
- Plastics & Elastomers End Uses
- Plastics & Elastomers Processing Methods
Properties
- Mechanical Properties
- Physical Properties
- Thermal Properties
- Electrical Properties
- Flammability
Value | Units | Test Method / Conditions | |
Unnotched izod impact (23°C) | 50 | kJ/m² | ISO 180/1U |
Flexural modulus (2mm/min) (23°C) | 5000 | MPa | ISO 178 |
Flexural strength (2mm/min) (23°C) | 230 | MPa | ISO 178 |
Tensile modulus (1mm/min) (23°C) | 6000 | MPa | ISO 527-2 |
Tensile strain at break (5mm/min) (23°C) | 3 | MPa | ISO 527-2 |
Tensile stress at break (5mm/min) (23°C) | 135 | MPa | ISO 527-2 |
Unnotched charpy impact (23°C) | 55 | kJ/m² | ISO 179/1eU |
Value | Units | Test Method / Conditions | |
Mold shrinkage- parallel/normal (3mm) | 0,8/1,1 | % | ISO 294-4 |
Ash content | 15 | % | ISO 3451-4 |
Density (23°C) | 1,23 | g/cm3 | ISO 1183 |
Determination of water content | 0,1 | % | ISO 1183 |
Value | Units | Test Method / Conditions | |
Notched izod impact (23°C) | 7 | kJ/m² | ISO 180/1A |
Melting point | 220 | °C | ISO 75-2/A |
Notched charpy impact (23°C) | 8 | kJ/m² | ISO 75-2/B |
Value | Units | Test Method / Conditions | |
Properties | 550 | V | EN 60112 |
Value | Units | Test Method / Conditions | |
Properties | HB | - | ASTM D257 |