Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Fillers Included
- Polymer Name
- Plastics & Elastomers Functions
- Technologies
- Product Families
Features & Benefits
- Materials Features
- Notes
Eplamid HT00 grades offer the following unique properties in general conditions, and even after moisture absorption: Good Surface Finish, Good Dimensional Stability, Good High Temperature Properties, Good Chemical Resistance to Glycols and Oils and Exellent Creep Resistance. Eplamid HT00 grades are used for molding technical parts where higher operating temperatures and higher stiffness in moist environments are required.This material is available in natural and colors on request
Applications & Uses
- Markets
- Plastics & Elastomers End Uses
- Plastics & Elastomers Processing Methods
Properties
- Chemical Resistance
- Mechanical Properties
- Physical Properties
- Thermal Properties
- Electrical Properties
- Flammability
| Value | Units | Test Method / Conditions | |
| Unnotched charpy impact (23°C) | 80 | kJ/m² | ISO 179/1eU |
| Tensile modulus (1mm/min) (23°C) | 16200 | MPa | ISO 527-2 |
| Tensile strain at break (5mm/min) (23°C) | 2 | MPa | ISO 527-2 |
| Tensile stress at break (5mm/min) (23°C) | 240 | MPa | ISO 527-2 |
| Value | Units | Test Method / Conditions | |
| Mold shrinkage- parallel/normal (3mm) | 0,1/0,5 | % | ISO 294-4 |
| Ash content | 45 | % | ISO 3451-4 |
| Density (23°C) | 1,58 | g/cm3 | ISO 1183 |
| Determination of water content | 0,1 | % | ISO 1183 |
| Value | Units | Test Method / Conditions | |
| Notched charpy impact (-30°C) | 11 | °C | ISO 75-2/B |
| Maximum working temp. long term | 150 | °C | ISO 3146 |
| Maximum working temp. short term | 250 | °C | ISO 3146 |
| Melting point | 315 | °C | ISO 75-2/A |
| Notched charpy impact (23°C) | 11 | kJ/m² | ISO 75-2/B |
| Value | Units | Test Method / Conditions | |
| Properties | 600 | V | EN 60112 |
| Value | Units | Test Method / Conditions | |
| Properties | HB | - | ASTM D257 |