Search
the marketplace
through 230,000 Chemicals and Raw Ingredients
through 8,000+ Supplier owned storefronts
company tower banner
Era Polymers Company Logo

ERAPOL CC50A

1 of 174 products in this brand
Erapol CC50A is a cold castable polyurethane 50 Shore A elastomer. The product is free from MOCA (methylene bis-ortho chloroaniline) and flammable solvents that produces an elastomer with outstanding toughness, high elongation and abrasion resistance. It offers advantages in that it can be readily processed and cured at room or elevated temperatures. The convenient mix ratio and low viscosity allow for easy processing.

Polymer Name: Polyurethane Thermoset Elastomer (Polyether-based)

End Uses: Gaskets, Shock Absorbing Pads, Washer

Features: Abrasion Resistant, Excellent Toughness, High Elongation, Low Viscosity

    Knowde Enhanced TDS

    Identification & Functionality

    Chemical Family

    Polyurethanes (PU)

    Polymer Name

    Polyurethane Thermoset Elastomer (Polyether-based)

    Technologies

    Elastomers

    Product Families

    Elastomers — Specialty Elastomers

    Polyurethane Rubbers

    Features & Benefits

    Labeling Claims

    Flammable Solvents-free,

    Other Labeling Claims,

    Solvent-free

    Materials Features

    Abrasion Resistant,

    Excellent Toughness,

    High Elongation,

    Low Viscosity

    Applications & Uses

    Markets

    Automotive & Transportation,

    Building & Construction,

    Industrial

    Applications

    Automotive & Transportation — Automotive

    Aftermarket Parts & Components,

    Chassis & Brake

    Building & Construction — Building Materials

    Other Building Materials

    Industrial — Chemical & Industrial Manufacturing

    Other Industrial Applications,

    Tooling & Moldmaking

    Plastics & Elastomers End Uses

    Gaskets,

    Shock Absorbing Pads,

    Washer

    Application

    Typical applications and uses include: flexible molds for concrete panels and stamp pads, cast in place liners, washers, gaskets, vibration and sound dampening pads.

    Processing Procedure
    1. The Part B must be thoroughly mixed before decanting.
    2. Carefully weigh the correct proportions of the two components together in one container, mix thoroughly. Be careful not to entrap air whilst mixing.
    3. Pour the mixed material into molds that have been pre-coated with release agent, being careful to avoid trapping air.
    4. Allow casting to cure before demoulding.

    Adhesion

    Adhesion of Erapol based elastomers to various substrates is at best marginal if a primer is not used. Please consult Era Polymers for specific recommendations to improve adhesion.

    Properties

    Physical Form

    Liquid