Knowde Enhanced TDS
Identification & Functionality
- Additives Included
- Chemical Family
- Polymer Name
- Technologies
- Product Families
Features & Benefits
- Labeling Claims
- Materials Features
- Product Highlights
- Convenient 1:1 (volume) mix ratio
- 100% solids - zero - VOC
- Fast build for thick requirements - reduce labor and time
- Fast curing for quick turn around times - cost effective
- Hydrolytic stability and corrosion resistance
- Excellent abrasion resistance and toughness
- Plural component application equipment only
- Heavy duty industrial applications where elastomeric coatings / lining are specified
This particular spray system although it has a high hardness it has a good degree of flexibility and will handle some movement of the substrate associated with climate change or equipment subject to movement.
Applications & Uses
- Markets
- Applications
- Application Details
Surface Preparation
For specific details on recommended primers for surfaces, please consult Era Polymers. Substrates should be clean and dry. Any water on the substrate will react with the system when
spray and caused a less than satisfactory finish.Processing Characteristics
- Store in a dry location as urethane components are susceptible to moisture contamination.
- In cold weather, the containers should be kept above 15°C to maintain them in liquid condition.
- Precondition drums at 25-30°C and apply at 50-60°C at the gun.
- The polyol should be thoroughly mixed by mechanically means of using a stirrer inside the pail or drum first. The polyol is a blend of different components and will need to be mixed before use.
- The substrate should be at least 20°C or hotter.
- Power agitate the Part B during application.
Equipment
Use only 1:1 mix ratio (by volume) in heated plural component spray equipment. Both low and high-pressure equipment can be used.
Cure Details
Curing rate of this product is dependant on the ambient and surface temperatures. As the temperatures increase, the curing rate decreases. The product continues to cure overnight and it is advisable not to walk on it for 24 hours.
Properties
- Physical Form