Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Polymer Name
- Reinforcement Form
- Reinforcement Material
- Technologies
- Product Families
Features & Benefits
Applications & Uses
- Applications
- Plastics & Elastomers End Uses
Properties
- Mechanical Properties
- Typical Properties
- Electrical Properties
| Value | Units | Test Method / Conditions | |
| Flexural stress at rupture perpendicular to laminations | min. 555.52 - 492.22 | MPa | ISO 178 |
| Apparent modulus of elasticity in flexure | min. 26060 - 23194 | MPa | ISO 178 |
| Compressive strength perpendicular to laminations | min. 422.89 | MPa | ISO 604 |
| Impact strength (Charpy) parallel to laminations | min. 130.59 - 109.40 | kJ/m² | ISO 179/3C |
| Tensile strength | min. 382.38 - 306.94 | MPa | ISO 527-4 |
| Value | Units | Test Method / Conditions | |
| Thermal endurance | 130 | T.I. | IEC 60216 |
| Density | 1.886 | g/cm³ | ISO 1183 |
| Water absorption, absolute | max.7.90 | mg | ISO 62 |
| Value | Units | Test Method / Conditions | |
| Electric strength at 90°C in oil perpendicular to laminations | min. 13.29 | kV/mm | IEC 60243-1 |
| Breakdown voltage at 90°C in oil parallel to laminations | min. 50 | kV | IEC 60243-1 |
| Insulation resistance after immersion in water | min. 55.850 | MOhm | IEC 60167 |
| Comparative tracking index CTI | min. 300 | CTI | IEC 60112 |
Regulatory & Compliance
- Quality Standards
- ROHS Declaration
This material does not contain any substances of very high concern as listed in the EU directive 2011/65/EU, article 4, paragraph 1