ERREPIEMME

DWMID PA 66 FV50% Polyamide reinforced with 50% glass fiber, with good fluidity for injection molding of manufactured articles require very high stiffness.

Errepiemme ABS R Type A is used as high flow ABS for injection molding.

DWPLENE PP OMO FV10% AGR is a polypropylene homopolymer reinforced with 10% glass fiber, chemically crimped by injection molding.

DWCARB PC150 is a polycarbonate for general use with medium-low fluidity and high mechanical strength, are available on request in UV stabilized versions or with release agent.

DWMID PA 6 28S Polyamide a natural or colored according to sample of different viscosities. It is reinforced with fiber or glass microspheres, self-lubricating, mineral fillers.

Errepiemme PPS R40 R is reinforced with 40% glass fiber, an excellent fluidity allows fast cycles for products where rigidity, high chemical and mechanical resistance are required temperatures.

DWPLENE PP OMO TC40% is a polypropylene homopolymer reinforced with 40% talc, for injection molding.

DWBLEND PC / ABS V0 is a PC/ABS alloy with good fluidity and mechanical strength, self-extinguishing in class V0 over 1.6mm (method UL 94)

DWCARB PC V0 is a polycarbonate as it is for injection molding, self-extinguishing in class V0 on 1,6mm (method UL 94).