Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Fillers Included
- Polymer Name
- Technologies
- Product Families
Features & Benefits
- Materials Features
- KEY FEATURES
• High strength
• Solvent resistance
• Good temperature resistance
• Easy-to-print
• Solvent resistance
Applications & Uses
- Applications
- Plastics & Elastomers End Uses
- Plastics & Elastomers Processing Methods
- APPLICATIONS INCLUDE
• Soft tooling (injection, blow, thermoforming, composite)
• High stiffness jigs and fixtures
• High strength end use parts
• Replacement for light duty aluminum parts
Properties
- Physical Form
- Material Specific Properties
Value | Units | Test Method / Conditions | |
Continuous (use temperature 20000 hrs 1˚C) | 150 | — | IEC 60216 |
HDT (A 1.8 MPa) | 182 | ˚C | ISO 75 |
HDT (B 0.45 MPa) | 219 | ˚C | ISO 75 |
Specific Gravity | 1.32 | g/cm3 | ISO 1183 |
Technical Details & Test Data
- MECHANICAL PROPERTIES
Metric Test Method Print Orientation XY 45/45 YX ZX Ultimate Tensile Strength, MPa ISO 527-2 148 (4) 74.5 (2.0) 40.6 (3.4) 24.0 (5.3) Tensile Modulus, GPa ISO 527-2 16.0 (0.35) 6.59 (0.13) 3.50 (0.34) 3.51 (0.48) Strain at Break, % ISO 527-2 1.4 (0.1) 2.0 (0.2) 1.9 (0.4) 0.8 (0.2) Flexural Strength, MPa ISO 178 184 (5) 124 (3) 79.8 (5.2) 40.3 (3.5) Flexural Modulus, GPa ISO 178 11.4 (0.5) 6.32 (0.08) 3.47 (0.06) 2.40 (0.10) Notched Izod Impact Strength, kJ/m2 ISO 180/A 9.2 (1.3) 5.6 (0.4) 3.3 (0.9) 1.4 (0.3)
Storage & Handling
- MATERIAL HANDLING AND DRYING
Essentium HTN-CF25 is a slightly hygroscopic thermoplastic and will absorb moisture from humid air. Keep the material in the vacuum sealed packaging until you are ready to print with it. HTN-CF25 filament should always be fed to the printer in a dry container and stored in a dry cabinet. If the material does absorb more than 400ppm moisture, it should be dried in a low dew point (< -40˚C) oven or vacuum oven at 130˚C for 6 – 8 hours.
RECOMMENDED HSE PRINT SETTINGS
0.4mm Hozzle
Extrusion Width, mm 0.4 – 0.5 Layer Height, mm 0.2 –0.25 Print Speed, mm/s 50 – 500 Infill, % 15 – 75 Hozzle Temperature, ˚C 250 – 410 Bed Temperature, ˚C 80 – 90 IR Temperature, ˚C 20 – 40 Fan Speed, % 0 – 40 0.8mm Hozzle
Extrusion Width, mm 0.8 – 0.9 Layer Height, mm 0.3 –0.35 Print Speed, mm/s 40 – 220 Infill, % 15 – 75 Hozzle Temperature, ˚C 260 – 410 Bed Temperature, ˚C 80 – 90 IR Temperature, ˚C 20 – 40 Fan Speed, % 0 – 40 RECOMMENDED FDM PRINT SETTINGS
Nozzle Temperature, ºC 270 – 290 Bed Temperature, ºC 60 – 80 Print Speed, mm/s 40 – 80 First Layer Speed, mm/s 15 – 30 Fan Speed, % 0 – 20 Bed Material G-10/FR4 or Glass Bed Adhesion Method Magigoo® PA or PVA glue Infill Density, % <75