Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Polymer Name
- Technologies
- Product Families
Features & Benefits
- Materials Features
- KEY FEATURES
• Semi-rigid
• Best in class tear resistance
• Temperature resistance up to 120˚C
• Good abrasion and wear resistance
• Excellent chemical, solvent, oil and ozone resistance
Applications & Uses
- Applications
- Plastics & Elastomers End Uses
- APPLICATIONS INCLUDE
• ABS replacement
• Abrasion resistant covers
• Snap fit connectors
• Heavy load vibration isolation
• Impact rated structural components
Properties
- Physical Form
- Material Specific Properties
Value | Units | Test Method / Conditions | |
Abrasion Loss | 20 | mm3 | ISO 4649 |
Hardness | 73 | Shore D | ISO 868 |
Compression (70˚C) | 55 | — | ISO 815 |
Compression RT | 50 | — | ISO 815 |
Glass Transistion Temperature | 33 | ˚C | DMA |
Specific Gravity | 1.23 | g/cm3 | ISO 1183 |
Tear Strength | 220 | kN/m | ISO 34-1 |
Technical Details & Test Data
- MECHANICAL PROPERTIES
Metric Test Method Print Orientation XY 45/45 YX ZX Ultimate Tensile Strength, MPa ISO 37 39.2 (0.8) 32.7 (1.7) 24.0 (1.1) 24.8 (0.8) Tensile Modulus, GPa ISO 37 0.340 (0.016) 0.328 (0.016) 0.314 (0.010) 0.316 (0.046) Strain at Break, % ISO 37 730 (23) 510 (71) 73 (15) 110 (26) Notched Izod Impact Strength*, kJ/m2 ISO 180/A N N 15 (14)-H 5.4 (3.0)-C
Storage & Handling
- MATERIAL HANDLING AND DRYING
Essentium TPU 74D is a very hygroscopic thermoplastic and will rapidly absorb moisture from humid air. Keep the material in the vacuum sealed packaging until you are ready to print with it. TPU 74D filament should always be fed to the printer in a dry container and stored in a dry cabinet. If the material does absorb more than 200ppm moisture, it should be dried in a low dew point (< -40˚C) oven or vacuum oven at 90 – 120˚C for 2 – 3 hours.
RECOMMENDED HSE PRINT SETTINGS
0.4mm Hozzle
Extrusion Width, mm 0.4 – 0.45 Layer Height, mm 0.2 –0.25 Print Speed, mm/s 20 – 200 Infill, % 15 – 75 Hozzle Temperature, ˚C 270 – 330 Bed Temperature, ˚C 70 – 80 IR Temperature, ˚C 20 – 40 Fan Speed, % 10 – 40 0.8mm Hozzle
Extrusion Width, mm 0.75 – 0.85 Layer Height, mm 0.3 –0.35 Print Speed, mm/s 10 – 120 Infill, % 15 – 75 Hozzle Temperature, ˚C 280 – 350 Bed Temperature, ˚C 70 – 80 IR Temperature, ˚C 20 – 40 Fan Speed, % 10 – 60 RECOMMENDED FDM PRINT SETTINGS
Nozzle Temperature, ºC 230 – 250 Bed Temperature, ºC 50 – 80 Print Speed, mm/s 20 – 50 First Layer Speed, mm/s 15 – 20 Fan Speed, % 0 – 20 Bed Material G-10/FR4 or Glass Bed Adhesion Method Magigoo® Flex Infill Density, % <75