Products

Dimethylamino ethyl methacrylate, also known as MADAME or DMAEMA, serves as a reducing agent or electron donor when paired with type II photoinitiators. It is water-soluble, monofunctional and can improve adhesion of formulations.

To simplify your formulation processes, we provide bis GMA already diluted in a 80:20 ratio with TEGDMA. Bis-GMA and triethylene glycol dimethacrylate are commonly paired in dental formulations. All of our bisGMA products carry the lowest levels of BPA or bisphenol A on the market.

PL-450 is a liquid photoinitiator compound developed specifically for white and pastel pigmented systems as well as thicker clear films. It provides a perfect balance between surface cure and through cure to enable the best possible adhesion in these systems. Because it's a liquid, it works well as a press side additive for the printer.

PL-2263 is a versatile adhesion promoter for Energy Cured Coatings, Inks and Adhesives. It can enhance adhesion to a large range of challenging substrates. It is especially effective on many metals, glass and selected plastics.

PL-2152 is a methacrylate based adhesion promoter. It is a versatile adhesion promoter for energy cured coatings, inks, and adhesives. The low viscosity of this product makes it an ideal reactive diluent that can be added to formulations to enhance adhesion to a range of challenging substrates.

2-hydroxy-2-methyl-1-phenyl-1-propanone is a fast curing type-I photoinitiator. It is soluble in most monomers, oligomers and pre-polymers but insoluble in H2O.

PL-4265 is a 50:50 liquid blend of 2-hydroxy-2-methyl-1-phenyl-1-propanone and diphenyl (2,4,6-trimethylbenzoyl) phosphine oxide. It provides exceptional cure response in white and pastel pigmented systems as well as thicker clear films. It provides a perfect balance between surface cure and through cure to enable the best possible adhesion in these systems. PL-4265 soluble in most monomers, oligomers and pre-polymers. It is insoluble in H2O.

PL-7021 has a unique structure which results in a flexible cured product. Adding PL-7021 to formulations has been shown to increase toughness.

4-phenyl benzophenone is a very fast curing type-II photoinitiator. In the presence of O2, the use of an amine co-initiator is recommended. It is soluble in most monomers, oligomers and pre-polymers. It is insoluble in H2O.

PL-3208 Ethoxylated Bisphenol A Dimathacrylate is a difunctional monomer providing low volatility and flexibility.

2-Methyl-1-[4-(methylthio) phenyl]-2-morpholino propan-1-one is a type I photoinitiator primarily used in pigmented systems. It is oftentimes used with PL-ITX as a sensitizer to enhance the curing efficiency in inks. It is soluble in most monomers, oligomers and pre-polymers but insoluble in H2O.

PL-7110 is a low color urethane that is a viscous liquid at room temperature. Upon cure, PL-7110 creates a tough polymer with percent elongation near 60%. PL-7110 is non-yellowing and can be used in formulations to add toughness.

PL-3230 Tricyclodecane dimethanol diacrylate is a difunctional monomer that provides low shrinkage and excellent hardness.

PL-7210 has a unique combination of high tensile strength and good elongation, which results in excellent toughness upon curing. PL-7210 is also very low color.

Diphenyl (2,4,6-trimethylbenzoyl) phosphine oxide is a Type I photoinitiator best known for it's through cure abilities. It is soluble in most monomers, oligomers and pre-polymers but insoluble in H2O.

PL-7113 is a non-yellowing urethane that exhibits a high degree of elongation. It also has a high rate of conversion with low average shrinkage stress. PL-7113 can be added to formulations to add toughness.

PL-3124 2-Phenoxy Ethyl Methacrylate is a monofunctional monomer providing low odor and good adhesion properties.

PL-2122 is a versatile adhesion promoter for Energy Cured Coatings, Inks and Adhesives. It can enhance adhesion to a large range of challenging substrates. It is especially effective on many metals, glass and selected plastics.

PL-246 is a liquid photointitiator compound developed specifically for white and pastel pigmented systems as well as thicker clear films. It provides a perfect balance between surface cure and through cure to enable the best possible adhesion in these systems. Because it's a liquid, it works well as a press side additive for the printer.

PL-2155 is a versatile adhesion promoter for Energy Cured Coatings, Inks and Adhesives. It can enhance adhesion to a large range of challenging substrates. It is especially effective on many metals, glass and selected plastics.

PL-600 is a liquid Photoinitiator compound developed specifically for white and pastel pigmented systems as well as thicker clear films. It provides a perfect balance between surface cure and through cure to enable the best possible adhesion in these systems. Because it's a liquid, it works well as a press side additive for the printer. PL-600 is soluble in most monomers, oligomers and pre-polymers. It is insoluble in H2O.

PL-2121 is an effective adhesion promoter in a variety of applications. It demonstrates an especially strong affinity for adhesion to aluminum, cold rolled steel, stainless steel, and tin free steel when cured neat or in formulations. Low viscosity and high reactivity make PL-2121 an ideal choice for various energy cured coatings, inks, and adhesives.

PL-2317 is an acrylic acrylate based adhesion promoter for Energy Cured Coatings, Inks and Adhesives. It is especially effective on selected plastics.

PL-3122 Propoxylated Tetrahydrofurfuryl Acrylate is a monofunctional monomer providing good adhesion to plastics and low viscosity.

Bisphenol A Epoxy Methacrylate possesses a fast cure speed that forms a stiff polymer with above average hardness.

PL-500 is a eutectic blend made up of a 1:1 mixture of PL-CPK and PL-BPO. It is well suited for applications where ease of use and good surface cure are needed. PL-500 is soluble in most monomers, oligomers and pre-polymers. It is insoluble in H2O.

PL-2110 is a Phosphate containing adhesion promoter for Energy Cured Coatings, Inks and Adhesives. It can enhance adhesion to a large range of challenging substrates. It is especially effective on certain metals, glass and selected plastics.

PL-229W is a liquid photointitiator compound developed specifically for white and pastel pigmented systems as well as thicker clear films. It provides a perfect balance between surface cure and through cure to enable the best possible adhesion in these systems. Because it’s a liquid, it works well as a press side additive for the printer.

PL-CLR is a liquid photoinitiator compound developed specifically for thicker clear films where low yellowing is necessary. It provides a perfect balance between surface cure and through cure to enable the best possible adhesion in these systems. Because it’s a liquid, it works well as a press side additive for the printer. PL-CLR is soluble in most monomers, oligomers and pre-polymers. It is insoluble in H2O.

PL-165E is a 65:35 blend of oligo [ 2-hydroxy-2-methyl-1-[ 4-(1-methylvinyl) phenyl] propanone] and TMP(EO)3TA. It is a fast curing type-I photoinitiator soluble in most monomers, oligomers and pre-polymers but insoluble in H2O.

Benzil dimethyl ketal is a fast curing type-I photoinitiator. It is soluble in most monomers, oligomers and pre-polymers but insoluble in H2O.

PL-3201 Polyethylene Glycol 200 Dimethacrylate is dimethacrylate difunctional monomer. It's used in 3D printing,Adhesives and Sealants applications. It provides excellent adhesion, flexibility and impact strength.

PL-3209 is a difunctional monomer providing a good balance of hydrophobicity and hydrophilicity.

Bisphenol A Glycidyl Methacrylate, or bis-GMA is a high viscosity resin that has been used in dental formulations for years. Our bis GMA is manufactured with low levels of BPA or bisphenol A and low color.

PL-DRK is a liquid photoinitiator compound developed specifically for dark and black inks and coatings. It provides an optimum balance between surface cure and through cure to enable the best possible adhesion in these systems. Because of it's optimum viscosity, it can be used in flexo, screen and paste inks without negatively effecting rheology. It is also well suited as a press side additive for the printer. PL-DRK is soluble in most monomers, oligomers and pre-polymers. It is insoluble in H2O.

PL-7013 has a relatively low viscosity but upon curing exhibits high conversion and low shrinkage. It exhibits excellent flexibility once cured. PL-7013 is very low color.