Products

Dimethylamino ethyl methacrylate, also known as MADAME or DMAEMA, serves as a reducing agent or electron donor when paired with type II photoinitiators. It is water-soluble, monofunctional and can improve adhesion of formulations.

To simplify your formulation processes, we provide bis GMA already diluted in a 80:20 ratio with TEGDMA. Bis-GMA and triethylene glycol dimethacrylate are commonly paired in dental formulations. All of our bisGMA products carry the lowest levels of BPA or bisphenol A on the market.

PL-2263 is a versatile adhesion promoter for Energy Cured Coatings, Inks and Adhesives. It can enhance adhesion to a large range of challenging substrates. It is especially effective on many metals, glass and selected plastics.

PL-450 is a liquid photoinitiator compound developed specifically for white and pastel pigmented systems as well as thicker clear films. It provides a perfect balance between surface cure and through cure to enable the best possible adhesion in these systems. Because it's a liquid, it works well as a press side additive for the printer.

PL-7210 has a unique combination of high tensile strength and good elongation, which results in excellent toughness upon curing. PL-7210 is also very low color.

PL-4265 is a 50:50 liquid blend of 2-hydroxy-2-methyl-1-phenyl-1-propanone and diphenyl (2,4,6-trimethylbenzoyl) phosphine oxide. It provides exceptional cure response in white and pastel pigmented systems as well as thicker clear films. It provides a perfect balance between surface cure and through cure to enable the best possible adhesion in these systems. PL-4265 soluble in most monomers, oligomers and pre-polymers. It is insoluble in H2O.

PL-2152 is a methacrylate based adhesion promoter. It is a versatile adhesion promoter for energy cured coatings, inks, and adhesives. The low viscosity of this product makes it an ideal reactive diluent that can be added to formulations to enhance adhesion to a range of challenging substrates.

PL-2122 is a versatile adhesion promoter for Energy Cured Coatings, Inks and Adhesives. It can enhance adhesion to a large range of challenging substrates. It is especially effective on many metals, glass and selected plastics.

2-Methyl-1-[4-(methylthio) phenyl]-2-morpholino propan-1-one is a type I photoinitiator primarily used in pigmented systems. It is oftentimes used with PL-ITX as a sensitizer to enhance the curing efficiency in inks. It is soluble in most monomers, oligomers and pre-polymers but insoluble in H2O.

2-hydroxy-2-methyl-1-phenyl-1-propanone is a fast curing type-I photoinitiator. It is soluble in most monomers, oligomers and pre-polymers but insoluble in H2O.

PL-3124 2-Phenoxy Ethyl Methacrylate is a monofunctional monomer providing low odor and good adhesion properties.

PL-7113 is a non-yellowing urethane that exhibits a high degree of elongation. It also has a high rate of conversion with low average shrinkage stress. PL-7113 can be added to formulations to add toughness.

PL-3208 Ethoxylated Bisphenol A Dimathacrylate is a difunctional monomer providing low volatility and flexibility.

PL-3230 Tricyclodecane dimethanol diacrylate is a difunctional monomer that provides low shrinkage and excellent hardness.

4-phenyl benzophenone is a very fast curing type-II photoinitiator. In the presence of O2, the use of an amine co-initiator is recommended. It is soluble in most monomers, oligomers and pre-polymers. It is insoluble in H2O.

PL-7021 has a unique structure which results in a flexible cured product. Adding PL-7021 to formulations has been shown to increase toughness.

PL-7110 is a low color urethane that is a viscous liquid at room temperature. Upon cure, PL-7110 creates a tough polymer with percent elongation near 60%. PL-7110 is non-yellowing and can be used in formulations to add toughness.

Diphenyl (2,4,6-trimethylbenzoyl) phosphine oxide is a Type I photoinitiator best known for it's through cure abilities. It is soluble in most monomers, oligomers and pre-polymers but insoluble in H2O.

PL-3122 Propoxylated Tetrahydrofurfuryl Acrylate is a monofunctional monomer providing good adhesion to plastics and low viscosity.

PL-250 is an amino acrylate synergist which offers fast cure speeds and low residual odor. The low viscosity makes PL-250 easy to work with. This product works especially well with certain Type II photoinitiators to increase cure speed.

PL-165E is a 65:35 blend of oligo [ 2-hydroxy-2-methyl-1-[ 4-(1-methylvinyl) phenyl] propanone] and TMP(EO)3TA. It is a fast curing type-I photoinitiator soluble in most monomers, oligomers and pre-polymers but insoluble in H2O.

PL-3216B is a difunctional monomer providing water resistance and fast cure.

PL-150 is oligo [ 2-hydroxy-2-methyl-1-[ 4-(1-methylvinyl) phenyl] propanone] and 2-Hydroxy-2-methyl-1-phenyl-1-propanone. It is a very fast curing type-I photoinitiator soluble in most monomers, oligomers and pre-polymers but insoluble in H2O.

PL-175D is a 75:25 blend of oligo [ 2-hydroxy-2-methyl-1-[ 4-(1-methylvinyl) phenyl] propanone] and DPGDA. It is a fast curing type-I photoinitiator soluble in most monomers, oligomers and pre-polymers but insoluble in H2O.

PL-3102 is a monofuctional monomer that provides water resistance and flexibility.

PL-2236 is a versatile adhesion promoter for Energy Cured Coatings, Inks and Adhesives. It can enhance adhesion to a large range of challenging substrates. It is especially effective on many metals, glass and selected plastics.

PL-LTE is a liquid photoinitiator compound developed specifically for lighter colored (non white) inks and coatings. It provides an optimum balance between surface cure and through cure to enable the best possible adhesion in these systems. Because of it’s optimum viscosity, it can be used in flexo, screen and paste inks without negatively effecting rheology. It is also well suited as a press side additive for the printer PL-LTE is soluble in most monomers, oligomers and pre-polymers. It is more

PL-2212 is a versatile adhesion promoter for Energy Cured Coatings, Inks and Adhesives. It can enhance adhesion to a large range of challenging substrates. It is especially effective on many metals, glass and PET.

Bisphenol A Epoxy Methacrylate possesses a fast cure speed that forms a stiff polymer with above average hardness.

PL-2110 is a Phosphate containing adhesion promoter for Energy Cured Coatings, Inks and Adhesives. It can enhance adhesion to a large range of challenging substrates. It is especially effective on certain metals, glass and selected plastics.

PL-OB is a highly efficient heat resistant, monomer soluble, chemically stable fluorescent whitener that provides brighter looking colors in a variety of system types.

PL-605 is a liquid photoinitiator compound developed specifically for thick clear UV and LED curable coatings and gels.

PL-229W is a liquid photointitiator compound developed specifically for white and pastel pigmented systems as well as thicker clear films. It provides a perfect balance between surface cure and through cure to enable the best possible adhesion in these systems. Because it’s a liquid, it works well as a press side additive for the printer.

PL-3300A is a trifunctional monomer that provides hardness and cure speed.

PL-200 is an effective hydrophilic fumed silica providing excellent gloss and rheology control in inks, coatings, adhesives gel coats and resins.

PL-3203 is a difunctional monomer providing good flexibility and is water soluble.