Knowde Enhanced TDS
Identification & Functionality
- Additives Included
- Chemical Family
- Polymer Name
- Plastics & Elastomers Functions
- Additive
- Mold Release
- Technologies
Features & Benefits
- Materials Features
- Features
Filler/Reinforcement - Unfilled
ROHS Compliance - ROHS compliant
Features - Low Viscosity
Processing Method - Injection Molding Grade
Applications & Uses
- Applications
- Plastics & Elastomers End Uses
- Plastics & Elastomers Processing Methods
Properties
- Color
- Flame Rating
- Appearance
- Black
- Physical Properties
- Mechanical Properties
- Thermal Properties
- Typical Properties
- Electrical Properties
- Flammability
| Value | Units | Test Method / Conditions | |
| Specific Gravity | 1.3 | — | ASTM D-792 |
| Water Absorption (Saturation, 23°C) | 0.5 | % | ISO 62 |
| Water Absorption (Equilibrium, 23°C, 50%RH) | 0.25 | % | ISO 62 |
| Value | Units | Test Method / Conditions | |
| Tensile Stress (Yield) | 50 | MPa | ASTM D-638 |
| Tensile Strain (Break) | 25 | % | ASTM D-638 |
| IZOD Impact Strength (23°C , Notch) | 45 | J/m | ASTM D-256A |
| IZOD Impact Strength (23°C , Unnotch) | NB | J/m | ASTM D-256A |
| Flexural Strength | 85 | MPa | ASTM D-790 |
| Value | Units | Test Method / Conditions | |
| Heat Deflection Temperature (0.45 MPa Unannealed) | 140 | °C | ASTM D-648 |
| Heat Deflection Temperature (1.8 MPa Unannealed) | 65 | °C | ASTM D-648 |
| Value | Units | Test Method / Conditions | |
| Volume Resistivity | 1E+ 14 | Ohm-cm | ASTM D 257 |
| Drying Time (3 - 4 hour) | 110 - 120 | °C | — |
| Value | Units | Test Method / Conditions | |
| Comparative Tracking Index | 550 | V | IEC 60112 |
| Value | Units | Test Method / Conditions | |
| Flammability Classification (0.75mm) | HB | — | — |
Regulatory & Compliance
- Certifications & Compliance
Safety & Health
- Product Safety
ESTOPLAST EP is thermally stable up to 280°C and does not give rise to hazardous material due to degradation or evolution of gasses and vapors. ESTOPLAST EP decomposes above 350°C and gives unsaturated hydrocarbons and smal quantity of aldehydes. For more information on safety, refer individual product MSDS. Available on request.
Packaging & Availability
- Packaging Type
Storage & Handling
- Storage
It should be pre-dried as per the guideline mentioned above prior to molding. The standard packing size is 25kg. In order to prevent moisture pick up and contamination, supplied packaging should be kept closed and undamaged.