Staramide™ P1000IX2

Identification & Functionality

Chemical Family

Polyamides

Polymer Name

Polyamide 6 (PA 6)

Plastics & Elastomers Functions

Resin

Technologies

Plastics

Product Families

Plastics — Engineering & Specialty Polymers

Polyamides

Features & Benefits

Materials Features

Impact Modified

Applications & Uses

Plastics & Elastomers Processing Methods

Injection Molding

Properties

Mechanical Properties

	Value	Units	Test Method / Conditions
Tensile Stress at Break	40	MPa	ISO 527-2/50
Tensile Stress at Yield	55	MPa	ISO 527-2/1A/50
Tensile Strain at Break	80	%	ISO 527-1, -2
Flexural Modulus (2 mm/min)	2100	MPa	ISO 178
Flexural Stress	77	MPa	ISO 178
Charpy V - Notch Edge (-30°C, 80x10x4 Sp=62 mm)	13	kJ/m2	ISO 179/1eA
Charpy V - Notch Edge (23°C, 80x10x4 Sp=62 mm)	17	kJ/m2	ISO 179/1eA
Charpy Unnotch Edge (-30°C, 80x10x4 Sp=62 mm)	85	kJ/m2	ISO 179/1eU
Charpy Unnotch Edge (23°C, 80x10x4 Sp=62 mm)	min. 100	kJ/m2	ISO 179/1eU
Izod Notched Impact Strength (80x10x4, - 30°C)	13	kJ/m2	ISO 180/1A
Izod Notched Impact Strength (80x10x4, 23°C)	15	kJ/m2	ISO 180/1A
Izod Unnotched Impact Strength (80x10x4, - 30°C)	75	kJ/m2	ISO 180/1U
Izod Unnotched Impact Strength (80x10x4, 23°C)	min. 100	kJ/m²	ISO 180/1U

Physical Properties

	Value	Units	Test Method / Conditions
Mold Shrinkage - Flow (4mm)	1.4 - 1.6	%	E2P Method
Density	1.1	g/cm3	ISO 1183

Thermal Properties

	Value	Units	Test Method / Conditions
HDT/Ae (1.8 MPa Edge 120x10x4 Sp=100mm)	64	°C	ISO 75/Ae

Processing Parameters

	Value	Units	Test Method / Conditions
Drying Temperature	75 - 85	°C	-
Mold Temperature	60 - 90	°C	--
Drying Time	4.0 - 6	hrs	-
Front - Zone 3 Temperature	240 - 250	°C	-
Maximum Moisture Content	0.2	%	-
Melt Temperature	240 - 250	°C	-
Middle - Zone 2 Temperature	230 - 240	°C	-
Rear - Zone 1 Temperature	220 - 230	°C	-