Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Polymer Name
- Plastics & Elastomers Functions
- Technologies
Features & Benefits
- Labeling Claims
Applications & Uses
- Applications
- Plastics & Elastomers End Uses
- Plastics & Elastomers Processing Methods
Properties
- Color
- Flame Rating
- Mechanical Properties
- Typical Properties
- Thermal Properties
- Processing Parameters
- Electrical Properties and Flammability
| Value | Units | Test Method / Conditions | |
| Izod Impact Notched (at 23°C) | 7 | kJ/m2 | ISO 180/1A |
| Izod Impact Notched (at 23°C) | 55 | MPa | ISO 527 |
| Izod Impact Un Notched (-30°C) | NB | kJ/m2 | ISO 180/1A |
| Izod Impact Un Notched (at 23°C) | NB | kJ/m2 | ISO 180/1U |
| Stress at Break (at 23 °C) | 8 | kJ/m2 | ISO 180/1A |
| Tensile Modulus (at 23°C) | 2500 | MPa | ISO 527 |
| Value | Units | Test Method / Conditions | |
| Density | 1.31 | g/dm3 | ISO 1183 |
| Melt Flow Rate | 15 | g/10 | ISO 1133 |
| Moisture Absorption (50% RH at 23°C) | 0.2 | % | ISO 62 |
| Moisture Content | 0.08 | % | ISO 960 |
| Molding Shrinkage | 1.6 | % | Eurotec |
| Value | Units | Test Method / Conditions | |
| Heat Deformation Temperature (0.45 MPa) | 60 | °C | ISO 75 |
| Melting Temperature (10 K/min) | 225 | °C | ISO 11357 |
| Value | Units | Test Method / Conditions | |
| Back Pressure | Low | — | — |
| Drying | 120 / 2 - 4 | °C / hr | — |
| Feed Throat Temperature | 50 - 70 | °C | — |
| Hold Pressure | 40 - 80 | MPa | — |
| Injection Speed | Medium fast | — | — |
| Mold Temperature | 60 - 100 | °C | — |
| Processing Temperature | 240 - 260 | °C | — |
| Value | Units | Test Method / Conditions | |
| Flame Rating (0.75 mm) | HB | — | UL94 |
| Flame Rating (1.6 mm) | HB | — | UL94 |
| Surface Resistivity | 100000000000000 | Ohm | IEC 60093 |
| Volume Resistivity | 1E+16 | Ohm-cm | IEC 60093 |
Regulatory & Compliance