Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Product Type
- Technologies
- Product Families
Features & Benefits
- Labeling Claims
- Ready-to-Use Product Features
- Features & Benefits
Ever-Thane Bright White Plus provides a host of advantages. It is quick, easy to apply, and saves on labor cost. As a maintenance coating, it can be used to coat an entire roof system, to make spot repairs. As with other Everroof® coatings, Ever-Thane Bright White Plus provides exceptional resistance to chemicals, acids, oils, and other pollutants, all of which can affect and reduce the life of a roof system. Ever-Thane Bright White Plus is a remarkably durable, high performance urethane coating that will protect and reduce the surface temperature of a roof, helping to reduce internal temperatures of buildings and alleviate stress on HVAC systems. When used as part of a system, Ever-Thane Bright White Plus provides a costeffective, eco-friendly approach of extending the life of an existing roof system.
Applications & Uses
- Applications
- Cure Method
- Typical Uses
Ever-Thane Bright White Plus can be applied to aged or cured single-ply, metal, spray polyurethane foam, built-up roof, modified bitumen and concrete roof systems either as part of a complete cool roof restoration system or as part of a maintenance or repair program. All Everroof® products are to be used and applied with reference to and in conjunction with Everroof® Guidelines and Specifications.
- Applications
Prior to coating any surface, be sure the coating will adhere by performing an adhesion test (ASTM D903). Coating may be applied by brush, roller, or airless spray equipment (see Everroof® Spray Application Guide). Do not apply when temperatures are below 40ºF (4.4ºC) or when precipitation is in the forecast within 48 hours. Spray application is not recommended below 50ºF (10ºC). In areas where the roof is subject to foot traffic, it is recommended to apply walkway pads for added protection and slip resistance. Ever-Thane Bright White Plus is very sensitive to heat and moisture. Higher temperatures and/or high humidity will accelerate cure time, therefore, use caution in batch sizes and thickness of application.
Curing
At 75°F (24°C) and 50% relative humidity, allow each coat to cure 16 hours between each coat. Cure time will vary depending on temperature and humidity Allow 24 hours before permitting light pedestrian traffic on to the finished surface. If more than 48 hours passes between coats, re-prime the surface with Ever-Thane Bright White Plus before proceeding. Please read all information in the general guidelines, technical data sheets, application guide, and safety data sheets (SDS) before applying material. Published technical data and instructions are subject to change without notice. Ever-Thane Bright White Plus is very sensitive to heat and moisture. Higher temperatures and/or high humidity will accelerate the cure time. Low temperatures and/or low humidity will extend the cure time. Use caution in batch sizes and thickness of application. If accelerated curing is required, add one quart (0.95 liter) of Ever-Thane Accelerator in a 5 gallon pail EverThane Bright White Plus and mix thoroughly. This accelerated Ever-Thane Color Coat 100 will cure in 6-8 hours at 75°F (24°C) and 50% relative humidity. The re-coat time with accelerator is reduced to 24 hours. If the re-coat window has passed, then solvent wipe the surface with VOC compliant solvent and re-prime surface with Everroof ® Primer U11 before proceeding to the next coat.
Coverage
Ever-Thane Bright White Plus has a theoretical wet film thickness of 24 mils when applied at 1.5 gallons per 100 square feet. Coverage rate will depend on surface roughness and porosity.
Mixing
Review all technical data sheets, system sheets, labels, instructions, SDS, and Guide Specifications before mixing and applying. Mix Ever-Thane Bright White Plus 55 gallon drums and 5 gallon pails with a variable speed drill utilizing a jiffy mixer to suspend any settled pigments until a uniform color and consistency is attained. Mixing time will vary based on temperature and atmospheric conditions.
Properties
- Color
- Typical Properties
| Value | Units | Test Method / Conditions | |
| Durometer Hardness | 85 - 95 | Shore A | ASTM D2240 |
| Tear Strength | 300 - 400 | psi | ASTM D624 |
| Tensile Strength | 2700 - 3300 | psi | ASTM D2370 |
| Elongation | 300 - 400 | % | ASTM D412 |
| Specific Gravity | 1.34 | — | — |
| Total Solids by Weight | 74 - 78 | % | ASTM D2697 |
| Total Solids by Volume | 72 - 76 | % | ASTM D2697 |
| Viscosity | 2000 - 5000 | cps | — |
| Volatile Organic Compound | 50.0 | gms/liters | ASTM D2369-81 |
Safety & Health
- Health and Safety
Everroof® is committed to the health and safety of our customers. Everroof® products shall only be installed by certified contractors. Applicators are required to follow all proper handling, safety and installation procedures. Safety Data Sheets (SDS) are available on this material. Any individual who may come in contact with these products should read and understand the SDS.
Personal Protective Equipment
Since Ever-Thane Bright White Plus is atomized into a very fine particle distribution during spray application, it is essential that maximum effort is made to protect the spray applicator and others near the workplace from undue exposure. The best form of protection against organic solvents is the use of Type-C organic vapor cartridge respirators. To prevent excessive skin contact with the sprayed product, we recommend use of fabric coveralls and neoprene or other resistant gloves. Wear OSHAapproved protective goggles.
Job-site Protection
Overspray from Ever-Thane Bright White Plus can carry considerable distances and attention should be given to the following:
- Post warning signs a minimum of 100 feet from the work area.
- Cover all intake vents near the work area.
- Minimize or exclude all personnel not directly involved with the spray application.
- No welding, smoking or open flames.
- Have CO₂ or other dry chemical fire extinguisher available at the job-site.
- Provide adequate ventilation.
Vapor Inhalation
Effects of overexposure to vapor are characterized by nasal and respiratory irritation, dizziness, nausea, headache, fatigue, possible unconsciousness or even asphyxiation. Vapor inhalation problems are characterized by coughing, shortening of breath and tightness in the chest. Anyone exhibiting these types of symptoms should be immediately removed from the workplace and administered oxygen or fresh air. If the condition is prolonged or extreme, SUMMON EMERGENCY TRAINED MEDICAL ATTENTION IMMEDIATELY.
Skin Contact
Skin contact with liquid components can result in a rash or other irritation. Wash the affected skin area with water. Wipe residual liquid from the skin with a clean cloth, then wipe the affected area with 30% solution of rubbing alcohol. Follow the alcohol wipe with repeated washings with soap and water. If a rash or other irritation develops, see a physician.
Eye Contact
Eye Contact with liquid or sprayed components can result in corneal burns or abrasions. Upon exposure, eyes should be flushed with water for an extensive period. SUMMON EMERGENCY TRAINED MEDICAL ATTENTION IMMEDIATELY.
Technical Services
Additional information, product brochures, and guide specifications are available. Roof energy evaluations, life cycle cost analysis, and other roof management services are also available from an Everroof® Technical Consultant.
Maintenance
Periodic maintenance of Everroof® Roofing Systems ensures extended performance and reduces life cycle costs.
Packaging & Availability
- Packaging
- 5-Gallon Pail
- 55-Gallon Drum.
Storage & Handling
- Storage And Stability
Keep containers closed, store in a dry, cool place away from heat, sparks, open flame, and moisture. EverThane Bright White has a maximum shelf life of one year when stored at temperatures between 40°F and 80°F (4.44°C and 27°C). Caution should be exercised to prevent material from freezing.