Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Product Type
- Technologies
- Product Families
Features & Benefits
- Labeling Claims
- Ready-to-Use Product Features
- Features & Benefits
Ever-Thane Roof Flash can be used over a variety of roofing substrates including modified bitumen, built-up roofing, metal, spray polyurethane foam, wood, concrete and a variety of single-ply systems. Its fast curing time helps the applicator save time. Ever-Thane Roof Flash can be used as part of a complete cool roof restoration system for the Ever-Thane System, Ever-Silic System or the Ever-Crylic System. Also used for repairs of existing systems, roof repairs such as flashings, penetrations and seams.
Applications & Uses
- Markets
- Applications
- Application Area
- Cure Method
- Typical Uses
- Can be used for spot repairs
- Seam, flashing, and penetration reinforcement
- Seal joint and penetration repairs for solar panel systems and air conditioning units.
- Applications
Review all technical data sheets, system sheets, labels, instructions, SDS, and Guide Specifications before applying. Cure time will vary based on temperature and atmospheric conditions. Prior to coating any surface, be sure the coating will adhere by performing an adhesion test (ASTM D903). Coating may be applied by brush, spatula or trowel. Do not apply when temperatures are below 40°F (4.4°C) or when precipitation is in the forecast within 8 hours.
Coverage
The first coat of Ever-Thane Roof Flash should be applied at the rate of 1.5 gallon/100 square feet or 150 sqft/gallon The wet film thickness, exclusive of aggregate is 24 ± 2 mils per coat at rate of 1.5 gallon/100 sqft or 150 sqft/gallon. For metal roofs, fasteners coverage count per 3.5 gal pail is 1400 square feet. For seams, 3.5 gal pail @ 24 wet film thickness, 6” on center will cover 295 linear feet. Coverage rate will depend on surface roughness and porosity.
Mixing
Before application, mix Ever-Thane Roof Flash using a mechanical mixer at slow speed. Mix Ever-Thane Roof Flash thoroughly until a homogeneous mixture and color is attained. Do not dilute under any circumstance.
Properties
- Color
- Typical Properties
| Value | Units | Test Method / Conditions | |
| Hardness | 55 - 65 | Shore A | ASTM D2240 |
| Tear Strength | 150.0 | psi | ASTM D624 |
| Tensile Strength | 1501.0 | psi | ASTM D412 |
| Elongation | 100 - 200 | % | ASTM D412 |
| Specific Gravity | 1.35 | - | - |
| Total Solids by Weight | 90 - 94 | % | ASTM D2369 |
| Total Solids by Volume | 86 - 90 | % | ASTM D2697 |
| Viscosity (77°F) | 20,000 - 40,000 | cps | |
| Volatile Organic Compound | 100.0 | gms/liters | ASTM D2369-81 |
| Recoat Window | 24.0 | hrs | - |
Safety & Health
- Health and Safety
Everroof® is committed to the health and safety of our customers. Everroof® products shall only be installed by certified contractors. Applicators are required to follow all proper handling, safety and installation procedures. Safety Data Sheets (SDS) are available on this material. Any individual who may come in contact with these products should read and understand the SDS.
Vapor Inhalation
Effects of overexposure to vapor are characterized by nasal and respiratory irritation, dizziness, nausea, headache, fatigue, possible unconsciousness or even asphyxiation. Vapor inhalation problems are characterized by coughing, shortening of breath and tightness in the chest. Anyone exhibiting these types of symptoms should be immediately removed from the workplace and administered oxygen or fresh air. If the condition is prolonged or extreme, SUMMON EMERGENCY TRAINED MEDICAL ATTENTION IMMEDIATELY.
Skin Contact
Skin contact with liquid components can result in a rash or other irritation. Wash the affected skin area with water. Wipe residual liquid from the skin with a clean cloth, then wipe the affected area with 30% solution of rubbing alcohol. Follow the alcohol wipe with repeated washings with soap and water. If a rash or other irritation develops, see a physician.
Eye Contact
Eye Contact with liquid or sprayed components can result in corneal burns or abrasions. Upon exposure, eyes should be flushed with water for an extensive period. SUMMON EMERGENCY TRAINED MEDICAL ATTENTION IMMEDIATELY.
Maintenance
Periodic maintenance of Everroof®Roofing Systems ensures extended performance and reduces life cycle costs.
Packaging & Availability
- Packaging
- 3 1/2 -Gallon Can
Storage & Handling
- Storage And Stability
Keep containers closed, store in a dry, cool place away from heat, sparks, open flame, and moisture. Ever-Thane Roof Flash has a maximum shelf life of one year when stored at temperatures between 40°F and 80°F (4.44°C and 27°C). Caution should be exercised to prevent material from freezing.