company tower banner

Products

Ever Polymer

11 Products found on Ever Polymer in Disposable Nonwovens

TDSWith TDS

EVERLON® TC-95C banner

EVERLON® TC-95C

Polymer Name:Styrene Ethylene Butylene Styrene (SEBS)
Processing Methods:Injection Molding
Tear Strength:83.3 - 83.3 kN/m
Strain at Break:500.0 - 500.0 %

EVERLON® TC-95C is a High quality of strength and transparent: including crystal-clean grade and is based on SEBS, which is great at flexibility and elongation rate.

EVERLON® TC-63 banner

EVERLON® TC-63

Polymer Name:Styrene Ethylene Butylene Styrene (SEBS)
Processing Methods:Injection Molding
Tear Strength:41.16 - 41.16 kN/m
Strain at Break:600.0 - 600.0 %

EVERLON® TC-63 is a High quality of strength and transparent: including crystal-clean grade and is based on SEBS, which is great at flexibility and elongation rate.

EVERLON® TC-20C banner

EVERLON® TC-20C

Polymer Name:Styrene Ethylene Butylene Styrene (SEBS)
Processing Methods:Injection Molding
Tear Strength:27.44 - 27.44 kN/m
Strain at Break:850.0 - 850.0 %

EVERLON® TC-20C is a High quality of strength and transparent: including crystal-clean grade and is based on SEBS, which is great at flexibility and elongation rate.

EVERLON® TP-38D banner

EVERLON® TP-38D

Polymer Name:Styrene Ethylene Butylene Styrene (SEBS)
Processing Methods:Injection Molding
Tear Strength:54.88 - 54.88 kN/m
Strain at Break:350.0 - 350.0 %

EVERLON® TP-38D comply with a international standard , such as ISO 15759, usp class VI, YBB standard. Using on plastic plunger, Syringe, thin film, medical tube, pull cap...etc.

EVERLON® TM-45GWX banner

EVERLON® TM-45GWX

Polymer Name:Styrene Ethylene Butylene Styrene (SEBS)
Processing Methods:Injection Molding
Tear Strength:15.68 - 15.68 kN/m
Strain at Break:550.0 - 550.0 %

EVERLON® TM-45GWX comply with a international standard , such as ISO 15759, usp class VI, YBB standard. Using on plastic plunger, Syringe, thin film, medical tube, pull cap...etc.

EVERLON® TC-42 banner

EVERLON® TC-42

Polymer Name:Styrene Ethylene Butylene Styrene (SEBS)
Processing Methods:Injection Molding
Tear Strength:31.36 - 31.36 kN/m
Strain at Break:750.0 - 750.0 %

EVERLON® TC-42 is a High quality of strength and transparent: including crystal-clean grade and is based on SEBS, which is great at flexibility and elongation rate.

EVERLON® TC-75 banner

EVERLON® TC-75

Polymer Name:Styrene Ethylene Butylene Styrene (SEBS)
Processing Methods:Injection Molding
Tear Strength:56.84 - 56.84 kN/m
Strain at Break:550.0 - 550.0 %

EVERLON® TC-75 is a High quality of strength and transparent: including crystal-clean grade and is based on SEBS, which is great at flexibility and elongation rate.

EVERLON® TCE-30 banner

EVERLON® TCE-30

Polymer Name:Styrene Ethylene Butylene Styrene (SEBS)
Processing Methods:Injection Molding
Tear Strength:29.4 - 29.4 kN/m
Strain at Break:800.0 - 800.0 %

EVERLON® TCE-30 is a High quality of strength and transparent: including crystal-clean grade and is based on SEBS, which is great at flexibility and elongation rate.

EVERLON® TP-40D banner

EVERLON® TP-40D

Polymer Name:Styrene Ethylene Butylene Styrene (SEBS)
Processing Methods:Injection Molding
Tear Strength:93.1 - 93.1 kN/m
Strain at Break:450.0 - 450.0 %

EVERLON® TP-40D comply with a international standard , such as ISO 15759, usp class VI, YBB standard. Using on plastic plunger, Syringe, thin film, medical tube, pull cap...etc.

EVERLON® TC-55C banner

EVERLON® TC-55C

Polymer Name:Styrene Ethylene Butylene Styrene (SEBS)
Processing Methods:Injection Molding
Tear Strength:39.2 - 39.2 kN/m
Strain at Break:680.0 - 680.0 %

EVERLON® TC-55C is a High quality of strength and transparent: including crystal-clean grade and is based on SEBS, which is great at flexibility and elongation rate.

EVERLON® TM-70C banner

EVERLON® TM-70C

Polymer Name:Styrene Ethylene Butylene Styrene (SEBS)
Processing Methods:Injection Molding
Tear Strength:53.9 - 53.9 kN/m
Strain at Break:550.0 - 550.0 %

EVERLON® TM-70C comply with a international standard , such as ISO 15759, usp class VI, YBB standard. Using on plastic plunger, Syringe, thin film, medical tube, pull cap...etc.